GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660EBA024 IC660EBA024/AIC660EBA024/BIC660EBA024/CIC660EBA024/CAIC660EBA024/DIC660EBA024/EIC660EBA024/FIC660EBA024/HIC660EBA024/KIC660EBA024/LIC660EBA024/MIC660EBA024/O1IC660EBA024/RR
GENIUS Electronic Assembly for BBA024 24/48VDCRTD Anal (EBA Only) IC660 IC660E IC660EBA
The GE Fanuc IC660EBA024 electronic assembly is made for the Genius I/O block system. This electronic assembly with its corresponding terminal assembly (the IC660TAB024) makes up the whole functioning Genius I/O current source analog block. While the terminal assembly houses the block’s configuration settings that are stored in EEPROM and provides a base for all the field wiring, the electronic assembly contains the block’s microprocessor and provides an interface between field devices and the Genius bus. The IC660EBA024 electronic assembly also sends or accepts 4 milliamps to 20 milliamps rated analog signals. The IC660EBA024 electronic assembly comes with a 24/48 Volts DC rated block with 6 individually-isolated circuit channels (4 inputs and 2 outputs). Each circuit channel can accept 4 to 20 milliamps rated analog signals that are transmitted to the controller as discrete signals, and each input on its own provides 24 Volt DC loop power.
The IC660EBA024 electronic assembly comes with a dedicated bus switching module (BSM) that shares an electric common with the 2 output circuits and is isolated from the input circuits. All of the circuit channels support independent linear scale selection that helps convert internal values to application-supported engineering units. The electronic assembly offers software configuration and advanced diagnostics like alarm detection (low and high input signals), over-range and under-range input and output signal detection, open-wire detection (on the input), output error feedback detection, and internal fault reporting. The I/O block is backwards compatible with older block versions, and it supports configuration by using the IC66HHM501E hand-held monitor. The IC660EBA024 electronic assembly has an open-type design and it requires a protective enclosure for installation.
The final letter in the part number (ex. IC660EBA024K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.