GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660EBA105 IC660EBA105/AIC660EBA105/BIC660EBA105/CIC660EBA105/CAIC660EBA105/DIC660EBA105/EIC660EBA105/FIC660EBA105/HIC660EBA105/KIC660EBA105/LIC660EBA105/MIC660EBA105/NIC660EBA105/N1IC660EBA105/RR
GENIUS Electronic Assembly for BBA105 (EBA Only) 115Vac/125Vdc IC660E IC660EB IC660EBA
The IC660EBA105 output block is a current-source analog output block with 6 output circuits designed for devices that accept signals of 4 to 20 milliamps. Also, outputs 5 and 6 can be used for the voltage applications. This current source analog output block is available in 2 versions depending on the power supply that is needed for each version. There are 115 Volts AC current-source analog output blocks and 24/48 Volts DC output blocks. It weighs about 1.8 kilograms and has dimensions of approximately 8.83 x 3.34 x 3.91 inches. Other specifications include a heat dissipation rating of 12 Watts maximum, 1500 Volts of block to block isolation for 60 seconds, and I/O-enabled LEDs. The IC660EBA105 current-source analog output block has an output update frequency of 25 milliseconds, a tolerable humidity range of 5 to 95 percent (non-condensing), and a vibration rating of 1 G at 10 to 200 Hertz.
The GE Fanuc IC660EBA105 analog input block has several features that make it efficient. It provides power to all the circuits in the system without requiring a separate power source for the 4 to 20 milliamps rated signals. This block features a dedicated digital output that is designed to help in driving the Bus Switching Module (BSM). The BSM and the output circuitry are electrically common. Additionally, the IC660EBA105 block has configurable features including the CPU redundancy, output hold last state or default, output feedback time, and the feedback checking features. The operators of this block can choose to enable or disable the fault reporting function on a circuit by circuit basis. Thus block is also intended to perform output feedback and under-range/over-range diagnostics checks automatically.
The final letter in the part number (ex. IC660EBA105K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.