GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660EBD020 IC660EBD020/AIC660EBD020/BIC660EBD020/CIC660EBD020/CAIC660EBD020/DIC660EBD020/EIC660EBD020/FIC660EBD020/HIC660EBD020/KIC660EBD020/LIC660EBD020/MIC660EBD020/NIC660EBD020/PIC660EBD020/QIC660EBD020/RIC660EBD020/RRIC660EBD020/SIC660EBD020/TIC660EBD020/UIC660EBD020/VIC660EBD020/WIC660EBD020/XIC660EBD020/YIC660EBD020/Y1
GENIUS Electronic Assembly for BBD020 (EBD Only) 24/48Vdc Source IC660E IC660EB IC660EBD
The IC660EBD020 electronic assembly block is a 16-circuit source/sink input and output block. It is an intelligent and configurable module manufactured by GE Fanuc to interface to several discrete DC actuators and sensors. The IC660EBD020 block is part of the Genius I/O product family and it comes in 2 versions that can provide current to the field output devices. One of the DC 16-circuit source block versions is the 24/48 Volts DC type which is mainly for use with the 3-wire electromechanical and solid-state sensors. The other version is the 24 Volts DC type which is made for use with the 2-wire and 3-wire electromechanical and solid-state sensors. Additionally, these 2 DC 16-circuit sink blocks can both receive current from the field output devices. These 2 blocks are identical except for their voltage ratings.
Like most Genius I/O blocks, the IC660EBD020 block weighs approximately 1.8 kilograms and it measures 8.83 x 3.56 x 4.42 inches. Additionally, it features 1500 Volts of voltage block isolation and it has individual load side LEDs on each circuit. Other properties of this block include a selectable input filter time of 5 to 100 milliseconds and field switch, over-temperature, and open-wire input diagnostics. The required DC power current rating for the IC660EBD020 block and other Genius I/O blocks is 150 milliamps typical and 300 milliamps at maximum. The block has a power supply dropout time of 10 milliseconds and 68.8 Watts heat dissipation with 16 outputs rated for 2 Amps of current.
The final letter in the part number (ex. IC660EBD020K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.