GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
GENIUS Ph B 115Vac 8 CKT Electronic Assembly for BBD100 (EBD Only) IC660E IC660EB IC660EBD
The GE Fanuc IC660EBD100 I/O block is an 8-circuit input and output block. It is a product of GE Fanuc that is manufactured as part of the Genius I/O series. This block has dimensions of 8.83 x 3.50 x 3.94 inches and it weighs approximately 1.8 kilograms (4 pounds). The block features a standby power rating of 8.5 Watts when all the inputs and outputs are off. It has a single-source voltage rating of 93 to 132 Volts AC and a frequency range from 47 to 63 Hertz. The IC660EBD100 I/O block has a power source dropout time of 1 cycle with 16.7 microseconds at 60 Hertz, and 20 microseconds at 50 Hertz. Additional properties of this block and other blocks in this series include 1500 Volts of block-to-block isolation, a heat dissipation rating of 16 Watts maximum, and 43.5 Watts of output power in the on-state at a current rating of 2 Amps with 8 inputs and 8 outputs respectively.
The GE Fanuc IC660EBD100 I/O block is an 8-circuit grouped I/O block with 8 identical circuits designed and rated to operate at 115 Volts AC nominal voltage. This block features circuit LEDs on each circuit. In cases where a circuit is set up as an output, the LED indicator shows the output state that the CPU is commanding, but the LED indicates the presence of the input terminal threshold voltage when that same circuit is set up as an input. Generally, the IC660EBD100 I/O block is configurable as an input/output block, an output-only block, or an input-only block. This block can send out or accept one byte of data on every bus scan.
The final letter in the part number (ex. IC660EBD100K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.