GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC660ELD020 IC660ELD020AIC660ELD020BIC660ELD020CIC660ELD020DIC660ELD020EIC660ELD020FIC660ELD020HIC660ELD020KIC660ELD020LIC660ELD020MIC660ELD020NIC660ELD020PIC660ELD020QIC660ELD020RIC660ELD020SIC660ELD020TIC660ELD020UIC660ELD020VIC660ELD020WIC660ELD020XIC660ELD020YIC660ELD020Z
I/O MODULE 24/40VDC
The IC660ELD020 module is a Genius I/O electronics assembly module by GE Fanuc. It is a 24/48 Volts DC module with a current rating of 150 milliamps minimum and 300 milliamps maximum. This electronics assembly module is compatible with an I/O block. A Genius I/O system consists of different modules that include I/O blocks, I/O stations, Bus controllers, and handheld monitors. The electronics assembly module is used in the I/O block, which can communicate with different devices. The bus controller controls the data transfer between the communication bus and the CPU. The IC660ELD020 module has a microprocessor unit that can process tasks and communicate with other blocks. The module has an advanced diagnostics feature that can report faults in the electronics module. The handheld monitor can be connected to the I/O block as an interface between the operators and the block. It has a display panel along with a keypad for control.
The GE Fanuc IC660ELD020 module runs with 50 to 60 Hertz frequency at an ambient operating temperature set between 0 and 60 degrees Celsius. Individual LED indicators are provided for each of the isolated 16 circuits that reside on the front panel of the block. The LED indicators on the front panel show the status of the unit and its communication process by using the embedded I/O. With an open architecture design, the IC660ELD020 module is designed to have a small form factor. The Genius I/O block can monitor the current and voltage levels and save the waveforms for all the inputs. The electronics assembly should be well-grounded during the installation process.
The final letter in the part number (ex. IC660ELD020K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.