GE / IP FANUC Series 90/30 In Stock
SKU 2171141 UPC 0525523659325
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
This is only the Electronic Assembly - the Terminal Block (IC660TBM100) is sold seperatly or see the IC660BPM100 for a complete assembly.
IC660EPM100 is a Genius Power Track Block that used in different types of industrial and power monitoring applications. The IC660EPM100 power block automatically provides the operator with displays on a Genius handheld monitor. The IC660EPM100 power supply accepts either 115/230 VAC or 125 VDC inputs. Its software can be configured by the host or via the handheld monitor (HHM).
IC660EPM100 monitors current and voltage inputs and stores digitized waveform values for each input. IC660EPM100 calculates kilowatt hours, current, active power, RMS voltage, reactive power, and power factor from the digitized waveform values. Calculated data is then automatically sent by the IC660EPM100 to a host PLC or computer approximately two times per second. The Genius HHM can also display the same data, either locally or from any connection point on the bus.
The IC660EPM100 can couple with a delta configured 3-phase power system or with a single phase power system. IC660EPM100 accepts voltage inputs from 1-3 potential transformers and current inputs from up to three line current transformers, plus a neutral current transformer. The IC660EPM100 can be installed on a Genius bus up to 7500 feet from the host computer or PLC. It can be used in stand-alone applications without a host.
IC660EPM100 has a terminal assembly and an electronics assembly. The terminal assembly is where all fixed wiring is attached. The electronics assembly can be inserted or removed without disturbing configuration of the block. Inputs from transformers, both current and potential, are wired to the terminal assembly. The terminal assembly is mounted permanently. LEDs on the front of the electronics assembly indicate the status of the block and the communications bus. This location is also home to a convenient connector for the HHM.
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.