GE / IP FANUC Series 90/30 In Stock
SKU 2171141 UPC 0525523659325
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
This is only the Electronic Assembly - the Terminal Block (IC660TBM100) is sold seperatly or see the IC660BPM100 for a complete assembly.
IC660EPM100 is a Genius Power Track Block that used in different types of industrial and power monitoring applications. The IC660EPM100 power block automatically provides the operator with displays on a Genius handheld monitor. The IC660EPM100 power supply accepts either 115/230 VAC or 125 VDC inputs. Its software can be configured by the host or via the handheld monitor (HHM).
IC660EPM100 monitors current and voltage inputs and stores digitized waveform values for each input. IC660EPM100 calculates kilowatt hours, current, active power, RMS voltage, reactive power, and power factor from the digitized waveform values. Calculated data is then automatically sent by the IC660EPM100 to a host PLC or computer approximately two times per second. The Genius HHM can also display the same data, either locally or from any connection point on the bus.
The IC660EPM100 can couple with a delta configured 3-phase power system or with a single phase power system. IC660EPM100 accepts voltage inputs from 1-3 potential transformers and current inputs from up to three line current transformers, plus a neutral current transformer. The IC660EPM100 can be installed on a Genius bus up to 7500 feet from the host computer or PLC. It can be used in stand-alone applications without a host.
IC660EPM100 has a terminal assembly and an electronics assembly. The terminal assembly is where all fixed wiring is attached. The electronics assembly can be inserted or removed without disturbing configuration of the block. Inputs from transformers, both current and potential, are wired to the terminal assembly. The terminal assembly is mounted permanently. LEDs on the front of the electronics assembly indicate the status of the block and the communications bus. This location is also home to a convenient connector for the HHM.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.