GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC660TBA023 IC660TBA023AIC660TBA023BIC660TBA023CIC660TBA023-CAIC660TBA023DIC660TBA023EIC660TBA023FIC660TBA023HIC660TBA023KIC660TBA023LIC660TBA023MIC660TBA023-RCCIC660TBA023-RR
GENIUS Terminal Assembly for (TBA Only) TBA023 for IC660BBA023 IC660T IC660TB IC660TBA
The IC660TBA023 terminal base is a GE Fanuc terminal assembly. Together with the IC660EBA023 electronics assembly, it forms the complete IC660BBA023 I/O module which is a 24/48 Volts DC thermocouple block. The GE I/O blocks are configurable and self-contained I/O modules. The blocks are made of cast aluminum and they weigh approximately 4 pounds. The size of the whole I/O block is approximately 9 x 4 x 3 inches. A pair of matching terminal and electronics assemblies make up the I/O block. The terminal assemblies such as the IC660TBA023 terminal base assembly are mechanically and electrically keyed to accept an electronics assembly with the same voltage rating, wiring configuration, and number of circuits. Active components are housed in the electronics assembly which can be removed without affecting the field wiring.
The range of supply voltages for the IC660BBA023 terminal base assembly is 18 to 56 Volts DC at 9 Watts with 10% maximum ripple. The 6 block inputs are divided into 3 groups of 2. The typical input update time for all the input channels is 2 seconds and the maximum update time is 3 seconds. The open wire detection response time is less than 5 seconds. The I/O module supports multiple diagnostics including open wire, underrange, overrange, low alarm, high alarm and internal fault diagnostics. The input characteristics include a -25 to 150 millivolts measurement range and less than 4 microvolts of resolution. The minimum recommended operating temperature for the IC660BBA023 terminal base assembly is 32 degrees Fahrenheit and the maximum recommended operating temperature is 140 degrees Fahrenheit. The minimum recommended relative humidity level for the IC660BBA023 terminal base assembly is 5% and the maximum recommended relative humidity level is 95%.
The final letter in the part number (ex. IC660TBA023K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.