1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC660TBA024
SKU 2174048 UPC 0233195393026
MSRP $798
Other Available Revisions for the IC660TBA024 IC660TBA024/AIC660TBA024/BIC660TBA024/CIC660TBA024/CAIC660TBA024/DIC660TBA024/EIC660TBA024/FIC660TBA024/HIC660TBA024/KIC660TBA024/LIC660TBA024/MIC660TBA024/M1IC660TBA024/RR
Common misspellings:
- 1C660TBA024
- IC66oTBA024
- IC660T8A024
- IC660TBAo24
- IC660TBA02A
- IC660TBA024
GENIUS Terminal Assembly for (TBA Only) TBA024 for IC660BBA024 IC660T IC660TB IC660TBA
Technical Information
The GE Fanuc IC660TBA024 assembly is a terminal assembly. The IC660TBA024 terminal assembly is compatible with the ICC660BBA024 I/O module. The IC660TBA024 terminal assembly and the IC660EBA024 electronics assembly together make up the whole IC660BBA024 I/O module which is a 24/48 Volts DC current source analog block. There are 2 output circuits and 4 input circuits on the I/O module. An external resistor is required in each of the load’s return lines when both output circuits are grounded and the circuit loads are separated by a wide distance. This arrangement will protect the block against possible damage which could occur due to significant voltage differences that may be present between the ground points. The recommended resistance value for the external resistors is 10 ohms.
The output channels on the IC660TBA024 terminal assembly use a 12-bit ADC and they can control currents ranging from 0 to 24 milliamps. The output accuracy is 0.15% at 24 degrees Celsius and the output resolution is 6 microamps. The input circuits on the IC660TBA024 terminal assembly have a 24 Volts rated current loop supply which can provide 24 milliamps of current. The rated input accuracy is 0.1%. The conversion time can be configured between 16 and 400 milliseconds. The input resolution is 1 microamp for 200 milliseconds of conversion time. The power supply voltage range for the IC660TBA024 terminal assembly is 18 to 56 Volts DC and the peak current that is drawn is 600 milliamps. The maximum ripple is 10%. The maximum heat dissipated by the IC660TBA024 is 12 Watts. The I/O module has a weight of approximately 4 pounds and dimensions of approximately 8.83 x 3.5 x 3.9 inches.
The final letter in the part number (ex. IC660TBA024K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
Common related search terms: Emerson
