GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660TBA026 IC660TBA026/AIC660TBA026/BIC660TBA026/CIC660TBA026/CAIC660TBA026/DIC660TBA026/EIC660TBA026/FIC660TBA026/HIC660TBA026/KIC660TBA026/LIC660TBA026/MIC660TBA026/NIC660TBA026/PIC660TBA026/P1IC660TBA026/RR
GENIUS Terminal Assembly for (TBA Only) TBA026 for IC660BBA026 IC660T IC660TB IC660TBA
The GE Fanuc IC660TBA026 terminal assembly is an industrial terminal assembly. The IC660TBA026 terminal assembly is one of the two main components of the GE IC660BBA026 24/48 Volts DC current-source analog input I/O block. The IC660TBA026 terminal assembly is matched to the IC660EBA026 electronics assembly to create the I/O block. Current source blocks such as the IC660BBA026 I/O block are used to interface controllers to devices that provide 4 to 20 milliamps rated analog signals. A 115 Volts AC or 125 Volts DC current source analog input block is also available from GE Fanuc. These 2 I/O blocks are similar except for the required power supply. The main features of the IC660BBA026 block include six 4 to 20 milliamps rated input circuits, isolated channels, software configuration, advanced diagnostics, and a dedicated bus switching module control.
The IC660BBA026 I/O module does not require user calibration. Each input channel on the block has a 24 Volts current power loop supply and each input is isolated from other input circuits on the block. Independent linear scaling can be configured for each input circuit. The diagnostics available on the module includes low/high alarm reporting, open wire detection, internal fault reporting, and overrange/underrange detection. The power supply voltage range is from 18 to 56 Volts DC and the peak current rating is 700 milliamps. The input specifications include 1 microamp of input resolution, 0 to 25 milliamps of overrange capacity, 16.6 to 400 milliseconds of input conversion time, 1500 Volts rms of channel to channel isolation, 70 ppm per degree Celsius of thermal drift, and 100 ohms of input impedance. The recommended minimum and maximum values for the ambient operating temperature of the IC660TBA026 terminal assembly are 0 degrees Celsius and 60 degrees Celsius, respectively.
The final letter in the part number (ex. IC660TBA026K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.