GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660TBA105 IC660TBA105/AIC660TBA105/BIC660TBA105/CIC660TBA105/CAIC660TBA105/DIC660TBA105/EIC660TBA105/FIC660TBA105/HIC660TBA105/KIC660TBA105/LIC660TBA105/MIC660TBA105/NIC660TBA105/N1IC660TBA105/RR
|Product Type||Terminal Assembly|
|Number of Outputs||6|
|Output Type||Current-Source Outputs|
|Dimensions||8.8 x 3.5 x 3.9 inches|
|Operating Temperature||32 to 140 degrees Fahrenheit|
|Storage Temperature||-40 to 212 degrees Fahrenheit|
GENIUS Terminal Assembly for (TBA Only) TBA105 for IC660BBA105 IC660T IC660TB IC660TBA
The GE Fanuc IC660TBA105 terminal assembly from the GE Genius I/O product line. This terminal assembly comes with 6 outputs which are current-source outputs. In a Genius I/O system, the IC660TBA105 terminal assembly is connected to an electronics assembly in order to operate. However, the IC660TBA105 terminal assembly and the compatible Genius I/O series electronics assembly are sold separately. This terminal assembly weighs 4 pounds (1.8 kilograms) and its dimensions are 8.8 x 3.5 x 3.9 inches (22.4 x 8.9 x 10 centimeters). It supports a block to block isolation voltage rating of 1500 Volts for up to 1 minute. The IC660TBA105 terminal assembly dissipates 12 Watts of maximum heat during operation.
The GE Fanuc IC660TBA105 Genius I/O terminal assembly is rated for both 115 Volts AC voltage and 125 Volts DC. When it is assembled with its compatible electronics assembly, the IC660TBA105 terminal assembly is the part of the complete component that hosts all of the wiring connections both for itself and for the electronics assembly. This means that it is easy to remove or replace the electronics assembly because the electronics assembly can be removed or replaced with disconnecting any of the wiring that is connected to the terminal assembly. The IC660TBA105 terminal assembly can operate in a temperature range from 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius), and it can be stored in a temperature range from -40 to 212 degrees Fahrenheit (-40 to 100 degrees Celsius). It can tolerate 5 to 95% relative humidity without condensation in both operation and storage.
The IC660TBA105 terminal assembly from GE Fanuc is a terminal assembly. The IC660TBA105 terminal assembly is compatible with the GE IC660BBA105 I/O module which has 6 current-source outputs and which is rated for 125 Volts DC or 115 Volts AC. An I/O module such as the IC660BBA105 module has 2 main components that are an electronics assembly and a terminal assembly. The electronics assembly which is compatible with the IC660BBA105 module has the catalog number IC660EBA105. The electronics assembly can be replaced without requiring any changes to the I/O field wiring because all the field wiring terminates on the IC660TBA105 terminal assembly. The IC660TBA105 terminal assembly should not be operated in ambient temperatures that exceed 140 degrees Fahrenheit. Between 95 and 149 degrees Fahrenheit, every 10 degrees Celsius of reduction in ambient temperature doubles the MTBF for the IC660TBA105 terminal assembly and the associated electronics in the I/O module.
The storage temperature range for the IC660TBA105 terminal assembly is from -40 to 212 degrees Fahrenheit. The non-condensing ambient relative humidity should be maintained between 5 and 95%. The vibration rating for the terminal assembly is 5 to 10 Hertz with 0.2 inches of displacement. The IC660BBA105 I/O module has 6 independent output circuits which are isolated from the other circuits but which are electrically common to each other. The electrical power for the current loops associated with the module outputs is provided by the I/O module. The module output circuits use a dual 12-bit DAC (digital to analog converter) and they can manage currents ranging from 0 to 24 milliamps. The output signal characteristics include an output resolution of 6 microamps, an update frequency at 25 milliseconds, a current range of less than 4 milliamps to up to 20 milliamps, and an overrange capacity of 0 to 24 milliamps.
The final letter in the part number (ex. IC660TBA105K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.