GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660TBA106 IC660TBA106/AIC660TBA106/BIC660TBA106/CIC660TBA106/CAIC660TBA106/DIC660TBA106/EIC660TBA106/FIC660TBA106/HIC660TBA106/KIC660TBA106/LIC660TBA106/MIC660TBA106/NIC660TBA106/PIC660TBA106/P1IC660TBA106/RR
|Product Description||Terminal Assembly|
|Voltage Rating||115 Volts AC/125 Volts DC|
|Compatible I/O Block||IC660BBA106|
|Compatible Electronics Assembly||IC660EBA106|
|Operating Temperature||0 to 60 degrees Celsius|
|Storage Temperature||-40 to 100 degrees Celsius|
|Relative Humidity||5%-95%, Non-condensing|
GENIUS Terminal Assembly for (TBA Only) TBA106 for IC660BBA106 IC660T IC660TB IC660TBA
The IC660TBA106 Terminal Assembly is a Genius I/O box-style and screw-type terminal assembly module that has been designed by GE Fanuc. It hosts the field wiring connections between the I/O block and the field devices. Its rugged and compact design ensures its durability in industrial settings. This module is situated between the IC660BBA106 I/O Block and the IC660EBA106 Electronics Assembly in the system. The wiring requirements of the terminal assembly depend on the specifications of the compatible I/O block. The IC660TBA106 Terminal Assembly ensures expanded I/O capabilities within a field control station. Its tightening screws can be easily accessed by using a Phillips or flathead screwdriver. It is a heavy-duty industrial terminal assembly unit that has high levels of connectivity.
The IC660TBA106 Terminal Assembly has 32 screw-type terminals. It is equipped with slotted mechanical keying to make sure that it fits only with a compatible electronics assembly. Terminal 5 to 32 can be used to interface a variety of devices such as an input power supply, field devices, and a bus switching module. Terminal 5 is the ground terminal which ensures the safety of the block. Terminal 5 is connected to the block chassis. The DC power source must be connected to Terminals 6 and 7. An AC power source can be connected to the H and N terminals of the terminal assembly. The operating temperature range of the IC660TBA106 Terminal Assembly is 0 to 60 degrees Celsius. Since this module can store the configuration details, it is not required to configure the module again, even if the electronics assembly is replaced or removed. This module acts as the terminal for all the field wiring in the system.
The GE Fanuc IC660TBA106 terminal assembly is compatible with the I/O module with the catalog number IC660BBA106. This I/O module is a 115 Volts AC/125 Volts DC current source I/O module and it has 6 analog input circuits. The electronics assembly compatible with the IC660TBA106 terminal assembly has the catalog number IC660EBA106. The combination of the terminal assembly and the electronics assembly make up the whole I/O module. All field wiring to the I/O module is made specifically to the IC660TBA106 terminal assembly. The configuration of the I/O block is also stored in the IC660TBA106 terminal assembly, which enables the replacement of the electronics assembly without any I/O block reconfiguration. The operating temperature range for the IC660BBA106 terminal assembly is from 0 to 60 degrees Celsius. The MTBF for the electronics on the I/O module is increased by a factor of 2 for every 10 degrees Celsius reduction in the ambient temperature.
The dimensions of the GE IC660BBA106 terminal assembly are 224.4 x 88.9 x 3.94 millimeters. The I/O module weight is 4 pounds. The I/O module dissipates a total of 12 Watts as heat. The block to block isolation rating for the IC660TBA106 terminal assembly is 1500 Volts for a duration of up to 1 minute. When the IC660BBA106 I/O module is being used for 115 Volts AC inputs, the power supply voltage range is 93 to 132 Volts AC, the maximum current is 250 milliamps, and the power supply dropout time is 1 cycle. When the IC660BBA106 I/O module is being used for 125 Volts DC inputs, the power supply voltage range is 105 to 145 Volts DC, the maximum current is 140 milliamps, and 10 milliseconds is the minimum power supply dropout time.
The final letter in the part number (ex. IC660TBA106K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.