GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660TBD120 IC660TBD120/AIC660TBD120/BIC660TBD120/CIC660TBD120/CAIC660TBD120/DIC660TBD120/EIC660TBD120/FIC660TBD120/HIC660TBD120/KIC660TBD120/LIC660TBD120/MIC660TBD120/M1IC660TBD120/RR
|Product Type||Terminal Assembly|
|Compatible I/O Block||IC660BBD120|
|Compatible Electronics Assembly||IC660EBD120|
|Operating Temperature||0 to 60 degrees Celsius|
|Storage Temperature||-40 to 100 degrees Celsius|
|Relative Humidity||5-95%, Non-condensing|
GENIUS Terminal Assembly for (TBD Only) TBD120 for IC660BBD120 IC660T IC660TB IC660TBR
The IC660TBD120 Terminal Assembly is designed for use with the IC660BBD120 High-Speed Counter Block by GE Fanuc. It is also compatible with the IC660EBD120 Electronics Assembly, it has the screw clamp-type terminals, and it weighs 2 pounds. It is equipped with mechanical and electronic keys that need to be matched with the right type of electronics assembly. The diagnostic facilities of the counter module can detect wiring errors between the terminal assembly and the block. Its compact design means that it has reduced overall dimensions for easy installation. The IC660TBD120 Terminal Assembly can perform safe and efficient connections. It reduces the need for a custom panel and ducting and it saves installation and wiring costs.
The IC660TBD120 Terminal Assembly has an operating temperature range of 0 to 60 degrees Celsius. It comes with 32 screw-type terminals. The field wiring of the I/O block is done through the terminal assembly. It is designed so that the electronics assembly can be removed without changing the field wiring. It has screw-type terminals which accept wires with gauges of AWG #22 through AWG #12. Do not over-torque the terminal screws. The storage temperature range of the IC660BBD120 Terminal Assembly is from -40 to 100 degrees Celsius. It accepts stranded and solid wires. Prefabricated cables are also suitable for simplifying the wiring between I/O blocks. When terminating a bus at the terminal assembly, appropriate terminal resistors with impedance ratings of 75, 100, 120, or 150 Ohms must be placed across the Serial 1 and Serial 2 terminals. This terminal assembly fully meets a variety of complex wiring and installation needs.
The IC660TBD120 terminal block is a terminal block for the Genius I/O high speed counter block. This counter block is used to process signals of up to 200 KHz for industrial purposes. It is mostly used with velocity measurement, material handling, motion control, and turbine flowmeter applications. The counter has 12 inputs and 4 outputs and a 5 Volts DC output voltage from a source that is attached with an oscillator output. The block is an intelligent device with failed switch diagnostics and other diagnostics features. It can be configured by using software and it offers built-in protection against power surges at the output. The IC660TBD120 terminal block allows an external battery option for backup purposes. The front section of the block has a monitoring programmer terminal that aids in the connection of handheld devices.
The frequency of the IC660TBD120 terminal block is 50/60 Hertz and it runs with a voltage rating of 12/24 Volts DC or 115 Volts AC. There are counter inputs and counter outputs on the front side of the terminal. The terminal comes with an input impedance rating of 4 kiloohms. The count rate of the terminal is 200 KHz maximum if it is selected with a high-frequency filter, and 40 Hertz maximum when a low frequency filter is selected. The environmental temperature should be set between 0 and 60 degrees Celsius for normal operation. The LED terminal on the block shows the operating status of the application, the CPU communication, the circuit faults, the bus scans, the terminal assembly mismatches, and if there is no CPU communications. The IC660TBD120 terminal block is used with a load current rating of 200 milliamps. The terminal should be grounded during the installation.
The final letter in the part number (ex. IC660TBD120K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.