1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC660TBR110

★ ★ ★ ★ ★ Rated 0/5 Based on ratings.

Rate your purchase of the IC660TBR110

MSRP $798

Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

Repair Service

$259

Save $539

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Other Available Revisions for the IC660TBR110 IC660TBR110AIC660TBR110BIC660TBR110CIC660TBR110DIC660TBR110EIC660TBR110FIC660TBR110HIC660TBR110KIC660TBR110LIC660TBR110MIC660TBR110NIC660TBR110PIC660TBR110QIC660TBR110RIC660TBR110SIC660TBR110TIC660TBR110UIC660TBR110VIC660TBR110WIC660TBR110XIC660TBR110YIC660TBR110Z

Common misspellings:
  • 1C660TBR110
  • IC66oTBR110
  • IC660T8R110
  • IC660TBRl10
  • IC660TBR1l0
  • IC660TBR11o
  • IC660TBR110

GE Terminal Assembly for IC660BBR100 Not UL approved

Technical Information

The GE Fanuc IC660TBR110 assembly is a terminal assembly used with the Genius I/O device. It runs with a voltage rating of 24/48 Volts DC. The operating frequency is 50/60 Hertz. This terminal assembly can be configured as needed and it is intelligent enough to process complex logic and application demands. There are 16 isolated circuits on the front side of the terminal assembly. With an isolation rating of 1500 Volts rms between each other, these circuits each have their own LED indicator to show active connections through them. The IC660TBR110 terminal assembly is manufactured out of high-quality aluminum and it is small in size. The terminal assembly is used as the base of the complete block. All the field wiring connections are made through the terminal assembly. The configuration settings are also stored in the terminal assembly and they can be used to reconfigure the block when necessary. 


 

The IC660TBR110 terminal assembly is connected by using the retaining screws. Genius I/O blocks are easy in installation and can be used up to a distance of 7500 feet from the main PLC. The Genius I/O block uses the 5 Volts communication voltage to send and receive messages. The block is able to transmit inputs and diagnostic fault reports, and receive commands from the CPU and handheld monitors. The “Unit OK” and the different embedded I/O indicators are present along with the monitor port on the top of the terminal assembly. The block dissipates 10.1 Watts of energy as heat. The IC660TBR110 terminal assembly should be used in an environment with temperature between 0 and 60 degrees Celsius. The assembly should be well grounded to avoid electrical shocks.

The final letter in the part number (ex. IC660TBR110K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.