1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

GE Fanuc Emerson | Genius I/O

GE Fanuc Emerson | Genius I/O | Image click here to request a quote

The GE Fanuc Emerson Genius I/O product line has reached End Of Life. We maintain a large inventory of GE Genius I/O. Wiring diagrams, troubleshooting videos, and technical specifications are available on our product pages.

The GE Fanuc Emerson Genius I/O product line has reached End Of Life. We maintain a large inventory of GE Genius I/O. Wiring diagrams, troubleshooting videos, and technical specifications are available on our product pages.


Read More >

About GE Fanuc Genius IO
Genius I/O system are not the typical rack mounted I/O modules. Genius blocks are self-contained, Highly configurable, and highly intelligent I/O modules that can be installed from any location of the plant to implement an effective distributed I/O architecture.

Genius I/O benefits any user by significantly reducing engineering time and installation costs and promotes faster testing commissioning of the system. It also increases system uptime and makes system easier to maintain. Genius I/O mainly features system design flexibility due to a wide variety of module selection and compatibility, Intelligence via the software configurable channel parameters, Reduced installation costs by eliminating long signal wire runs, advanced diagnostics that may be used as reference for Predictive and reactive systems maintenance and embedded circuit protections that protects the module’s circuitry from common wiring mistakes.

The Genius I/O system is composed of 27 modules, that functions as Discrete Input, Discrete Output, Analog Input and Analog Output modules. Each module is composed of a terminal base and an Electronics assembly, with the module housing made of cast aluminum, having an approximate weight of 4 pounds and dimensions of 9” (22 cm) x 4” (10 cm) x 3” (9 cm).

The Genius I/O systems are primarily intended to act as Distributed I/O modules. With Distributed I/O architecture, Input and Output modules, including specialty modules can be installed away from the PLC CPU. It uses serial-based communication protocol, supporting daisy-chain topology. Data from the Genius I/O modules and commands from the PLC CPU are transmitted back and forth by the Genius Bus controller, which is capable of managing up to 31 devices connected in the same Genius I/O bus.  With Genius I/O, modules can be installed up to 7500 feet away from the controller or computer.

These modules are modular themselves. The terminal base may be removed without the need of dismantling the entire module or modifying the existing terminated wires. Each module supports electronic and mechanical keying that are different from every module, which greatly decreases the possibility human error by installing an incorrect terminal base to a module.   

Genius I/O modules are designed to be installed in enclosures that offers protection according to the environmental condition and area classification it is installed. This provides flexibility of mounting options to the end-user and contributes to a more cost-effective mounting solution. Genius I/O modules may be mounted near the equipment, inside junction boxes, enclosures, within operator stations, and other viable location that protects the modules from dust, dirt, corrosive gasses, high-level of vibration and shock as well as extreme levels of temperature.

Genius I/O modules supports horizontal and vertical mounting orientation however, with reference to heat dissipation, the recommended orientation is vertical mounting. At least 1-1/2 inch (3.84 cm) of space between blocks, and 3 inches (7.62 cm) above and below each block are the standard spacing requirements of Genius I/O modules to ensure adequate air flow.

Genius I/O supports a variety of GE PLC controller platforms including Series 90-70 PLC. Series 90-30 PLC, Series Six and Series Six Plus PLC, Series Five PLC and personal or industrial computers.

PROS:

  • Highly scalable
  • Highly Intelligent modules
  • Individual module configuration
  • Wide range of module selections suitable for almost any application
  • Wide range of GE PLC Platform supports
  • High Speed data communication rate
  • Eliminates long distance signal wiring
  • Advanced Diagnostics capable
  • Embedded circuit protection
  • Controller Redundancy Support

CONS:

  • Genius I/O relies on multi-node serial communication
  • Genius bus controller not supporting Ethernet protocol
  • Data is sent in broadcast mode which may affect communication speed and efficiency
  • Relatively low number of modules per segment compared to existing modern protocols
  • Less user friendly protocol
IC660BCM501Hand-Held Monitor Battery Charger battery pack or 115 volt AC or 230V AC IC660BC IC660BCMBuy Now
IC660BLC001

GE Cable w/Connectors Alpha 9823 15 In


Buy Now
IC660BLC003

GE Cable w/Connectors Alpha 9823 3 Ft


Buy Now
IC660BLM506

GE Bus Terminator 150 Ohm (Qty 4)


Buy Now
IC660BLM507

GE Fanuc Genius Block Puller, Handle removes genius block eletronic and terminal IC660BLM


Buy Now
IC660BLM508

GE Bus Terminator 75 Ohm (Qty 4)


Buy Now
IC660BPM500GENIUS Hand-Held Monitor Battery Pack (rechargeable) BPM500 IC660B IC660BP IC660BPMBuy Now
IC660BRD021

GE 24/48VDC SINK BLOCK FOR RDCY


Buy Now
IC660BSM021Bus Switching Module 24/48VDC controlled by Genius Block CPU HHM IC660 IC660BS IC660BSMBuy Now
IC660BSM120Bus Switching Module 115Vac/125VDC controlled by Genius Block CPU HHM IC660BS IC660BSMBuy Now
IC660EBS100

GE 115Vac/125Vdc Isolated I/O Electronic Block, 8 Circuit


Buy Now
IC660ELB904

IC660ELB904.GENA Network Adapter. GE PLC GENIUS.


Buy Now
IC660ELD020

I/O MODULE 24/40VDC


Buy Now
IC660HHC005

GENIUS Genius Interface Hand Held Monitor Cable IC660HHC005 IC660HHC0 IC660HHC IC660H


Buy Now
IC660HHM501GENIUS IC660HHM Hand-Held Monitor 501 with Cable & Charger IC660H IC660HH IC660HHMBuy Now
IC660HHM502

GE GENIUS HAND HELD MONITOR


Buy Now
IC660MBM503GE Hand-Held Monitor Panel Mount KitBuy Now
IC660MCA512

GE Hand-Held Monitor 220Vac Power Adapter


Buy Now
IC660MPH509

GENIUS Hand-Held Monitor Standalone Connector Kit MPH509 IC660M IC660MP IC660MPH


Buy Now
IC660TBR110

GE Terminal Assembly for IC660BBR100 Not UL approved


Buy Now
IC660TBR111

GE Terminal Assembly for IC660BBR101 NO UL approval.


Buy Now
IC660TRD020

GE Genius 24/48Vdc Terminal Asm. for Redundancy T Output Configuration


Buy Now

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.