GE / IP FANUC Series 90/30 In Stock
IC754CSF15CTD for the GE Quick Panel+ has 15-inch TFT Quick Panel Control/ Fully Loaded/ 24VDC. IC754CSF15CTD contains GE Quick Panel+ boundary within the whole microcomputer structured to permit flexibility as much as possible. With the Quick Panel+ communications ports, it is easier to link up industrial components with different forms of communication. The Quick Panel+ has many types of memory to facilitate application functionality. The Quick Panel+ has an Operating system which is a Microsoft Windows Embedded Compact 7 that links both the hardware and the software necessary to run a program. Quick Panel+ also has a retentive memory (SRAM) of 512KB, which is a storage device with battery backup for storing data. In addition, it should be set up in a place where there is no dust, humidity and away from corrosive gases. Putting these conditions into consideration will protect it from any damage.
Despite having a primary touch screen link, Quick Panel+ consists of Hardware User characters that hold up several communication ports. While setting up Quick Panel+ operator boundary it is essential to check if the containers are in good condition. Secondly, the user should check the basic setup and connect the DC power supply. Always check the power supply connection to ensure the I/O devices are working. Use a 24VDC power supply and a Power cord with 30 – 14 AWG (0.05 – 2.00 mm2), especially for the initial startup. The Quick Panel+ also has Software components such as the operating system that is kept in a flash memory and can be typed to a block of DRAM for further supervision. It has back utility software that keeps transformations that are made to the flash memory. In addition, there is also a storage manager that corrects data that has been interfered with.
Follow the following steps when setting up a Quick Panel+ unit. First, install the protective sheets to help protect the display from dust and debris. Next, select a stage that is big enough to facilitate the installation and removal of the storage card. Finally, use a Video Electronics Standards Association (VESA) MIS-D 75mm to ensure the Quick Panel+ has 75 mm of space on either side. The operating system panel can be used to modify and set up layout brightness. It is important to calibrate the touchscreen on the QuickPanel+.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.