GE / IP FANUC Series 90/30 In Stock
The IC754VBI06STD operator interface for GE QuickPanel+ is a display with View Intermediate 6 inch STN Touch DC Blank. It is an all-in-one microcomputer with a design that is based on an advanced ARM microprocessor for maximum flexibility. Its design combines a high-res touch-screen operator interface with a number of communication options. In fact, the QuickPanel+ comm ports allow you to connect to most industrial equipment. IC754VBI06STD has been equipped with several memory types in order to satisfy even the most demanding applications. A 512MB DRAM section is split between an object store, the operating system, and application memory. Additionally, a 256MB section of nonvolatile flash memory, which functions as a virtual hard drive, has been divided between persistent storage for application programs and the operating system.
The retentive memory protects your valuable data in case of a power outage as it consists of 512KB battery-backed SRAM dedicated to data storage. The IC754VBI06STD comes with a 1GHz ARM Cortex A8 Freescale i.MX535 processor and a Microsoft Windows Embedded Compact 7 operating system. Its TFT LCD display is a 7-inch widescreen with 800x480 pixels WVGA resolution. The backlight is LED. The touch screen panel is Projected Capacitive and two-point multi-touch. IC754VBI06STD features an Ethernet, Serial, USB host and USB device communication ports. The Ethernet port is 1x 10/100BaseT (RJ-45); the serial port is a 5-pin connector 1x RS-232 UART. There are two USB2.0 (Type-A) host ports with maximum power of 5V at 0.5A. There is one USB 2.0 (Mini Type-B) on the device.
One SD/SDHC Card Slot is responsible for storage. In terms of audio, there is one mic-in (mono) and one mic-out (stereo). Both jacks are 3.5mm. For noise immunity, pulse duration is at 1µs with rise time of 1ns. Noise voltage is at 1500V p-p. The maximum rated voltage for the IC754VBI06STD is +30 V DC with 3-Pin Connector rated voltage at +24 V DC ±20%. The maximum power consumption comes at 15W. The Frame GND connects internally to Signal GND. The physical dimensions of IC754VBI06STD come to 192 mm length × 137 mm width × 36 mm depth. It weighs 0.800 kg or 1.76 lbs. The mounting options are 183.5 mm ×128.5 mm for panel cutout dimensions and 75 mm x 75 mm VESA mount. When it comes to installation, the QuickPanel+ needs to be placed in a well-ventilated location that is not exposed to flammable gases, dust, rain, corrosive liquids, direct sunlight, strong ultraviolet light and which meets the environmental specifications discussed below.
This operator interface requires an ambient operating temperature between 0°C to and + 50°C, and a storage temperature between -20°C and +60°C. For both storage and operation, the ambient humidity allowed is 85% RH. Environment should be Pollution Degree 2 as defined by UL60950-1 and allow for natural convection cooling. IC754VBI06STD has a vibration resistance of 5 - 9Hz single-amplitude 3.5mm and 9Hz - 150Hz constant-accelerated velocity 9.8m/s2. During installation, remember to never apply power if the device has visible damage.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.