1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 9 ratings.

Rate your purchase of the IC754VGI08CTD
In Stock! IC754VGI08CTD 8 Inc Color QuickPanel View | Image

SKU 2175316  UPC 0664627548316


Technical Specifications for IC754VGI08CTD

ManufacturerGE Fanuc
Part NumberIC754VGI08CTD
Product TypeOperator Terminal
Screen Width8 Inches
Weight6 Pounds
Dimensions16 x 14 x 8 Inches
Memory32 MB
Input Power12 to 30 Volts DC

Product Description

IC754VGI08CTD is an 8 inch QuickPanel Color Display from GE Intelligent Platforms/GE Fanuc
. The QuickPanel operator interface is an all in one microcomputer that has been created for maximum flexibility. Based on the design of an advanced ARM core microprocessor, this unit brings together a variety of communication options with a hi-resolution touch screen system. The user has the option to connect the majority of industrial equipment using the communication ports with numerous memory types to meet the needs of even demanding applications. There are 512 MB of DRAM shared between the operating system, an object store, and the application memory that functions as a virtual hard drive. An additional 256 MB section of nonvolatile flash memory is also divided among persistent storage and the operating system. Retentive memory is also standard in case of power loss.

Microsoft Widows Embedded Compact 7 is the chosen operating system with LED backlight on a projected capacitive, 2-point touch screen. Input power is set at a maximum of +30VCD with rated voltage of +24 VCD =/-20% on a 3-pin connector. Reasonable power consumption of 15W max is expected.  The frame GND is connected internally to the signal GND. With natural convection, the ambient operating temperature is 0 to 50 degrees Celsius/32 to 122 degrees Fahrenheit. Ambient storage temperature should fall between -20 and +60 degrees Celsius/-4 to 140 degrees Fahrenheit. Upon installation, make sure the location is well vented and safe from dust, corrosive liquids, gases, rain, strong ultraviolet light, and direct sunlight for optimum and long lasting performance. The IC754VGI08CTD is compliant with the identified exemptions.

The IC754VGI08CTD touchscreen terminal from GE Fanuc is an industrial operator control terminal from the GE Fanuc Quickpanel terminal series.  The IC754VGI08CTD terminal is designed to be used both as a display device and as a machine control device. Its display screen is a touchscreen that is 8 inches wide and that can support color graphics. The operators can use the touchscreen with their hands and with a stylus. However, the stylus must be made of the right material with the right tip diameter, because materials and points that are too sharp will scratch and damage the IC754VGI08CTD terminal’s touchscreen.  The IC754VGI08CTD terminal weighs 6 pounds and its dimensions are 16 x 14 x 8 inches.


The color graphics provided by the GE Fanuc Quickpanel IC754VGI08CTD touchscreen terminal are designed to create attractive application and control layouts and to be easy to read, especially in settings where the levels of light are often relatively low. However, it is not recommended to install the IC754VGI08CTD touchscreen terminal in a location where it will frequently be exposed to direct sunlight or other sources of ultraviolet (UV) rays that can damage the terminal or make it difficult to use. Additionally, the IC754VGI08CTD touchscreen terminal will operate best when it is installed in a location where it will be well-ventilated and protected from dust and debris. It can communicate through its RS232 and RS485 ports, and it can connect to other machines with an HMI-CAB-C110 cable. The IC754VGI08CTD terminal has a memory capacity of 32 MB and it uses 12 to 30 Volts DC input power.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.