1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 0/5 Based on 0 ratings.

Rate your purchase of the IC755ACC10GAS
GE Fanuc PLC - QuickPanel - IC755ACC10GAS

SKU 0  UPC 00


GE Quick panel accessory kit IC755 ACC10GAS

Technical Information

Manufactured by GE Fanuc, the IC755ACC10GAS gasket is a replacement gasket designed for use with the 10-inch QuickPanel Plus terminals. This gasket's main purpose is to cover the user interface of the QuickPanel Plus operator terminal and also to cover the screen and each port of the user interface. On the original terminal, a gasket comes pre installed. However, a replacement gasket replacement is eventually needed because the terminal and its original gasket are exposed to certain environmental conditions during operation that eventually wear out the gasket, so it is necessary to have a replacement gasket. On the side of the gasket, there are bezel channels or slots in which the 10-inch QuickPanel Plus terminal will fit. No additional spaces or cutouts are required beyond the built-in one that is cut to the dimensions of the specific terminals it is designed to protect, and the thickness of these terminals ranges between 1.6 and 5 millimeters.


The GE Fanuc IC755ACC10GAS replacement gasket for the 10-inch GE QuickPanel Plus terminals has screws that are used to secure the device in place, and the users should tighten them in the clockwise direction. Where possible, it is recommended that constant insertions and removals of the terminals be minimized as much as possible to reduce the chances of wear and degradation to the IC755ACC10GAS gasket, and it is recommended to conduct a periodic inspection of the screws to make sure that they are secure. The terminals should be inserted into the gaskets by themselves without anything connected to them, because things like cables may prevent them from properly fitting into the gasket. When using the IC755ACC10GAS replacement gasket, the temperature level should be maintained within the range of 0 to 50 degrees Celsius.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.