GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC755CKS06RDMEP IC755CKS06RDMEPAIC755CKS06RDMEPBIC755CKS06RDMEPCIC755CKS06RDMEPDIC755CKS06RDMEPEIC755CKS06RDMEPFIC755CKS06RDMEPGIC755CKS06RDMEPHIC755CKS06RDMEPIIC755CKS06RDMEPJIC755CKS06RDMEPKIC755CKS06RDMEPLIC755CKS06RDMEPMIC755CKS06RDMEPNIC755CKS06RDMEPOIC755CKS06RDMEPPIC755CKS06RDMEPQIC755CKS06RDMEPRIC755CKS06RDMEPSIC755CKS06RDMEPTIC755CKS06RDMEPUIC755CKS06RDMEPVIC755CKS06RDMEPWIC755CKS06RDMEPXIC755CKS06RDMEPYIC755CKS06RDMEPZ
QUICKPANEL+ 6 WITH RSTI-EP MODBUS TCP
The IC755CKS06RDMEP terminal is an operator terminal manufactured by GE Fanuc as part of the QuickPanel product series. This terminal comes with a 6-inch display with an RSTI Modbus TCP. It also has a tricolor LED indicator that helps to show the users visual status updates. Additionally, it runs on the Microsoft Windows EC 7 operating system with a 32-bit GUI stored in the flash memory and copied to the DRAM for execution. The IC755CKS06RDMEP operator terminal has upgradeable firmware, and it is upgraded by inserting the SD card that contains the updated firmware version. When upgrading the firmware, the procedure outlined in the terminal user manual must be followed exactly. It is essential to inspect the package containing this operator terminal for any possible damage when it arrives. The operators should not apply any power to this terminal if it has visible damage.
The GE Fanuc IC755CKS06RDMEP operator terminal has approximate measurements of 192 x 137 x 36 millimeters. It supports panel mounting with a cutout that measures 183.5 x 128.5 millimeters. This terminal also has mounting clamps with a torque range of 0.3 N-m. Additionally, it allows for installation on a stand, a VESA MIS-D arm, or other apparatus which complies with the UL1678 standards. There are mounting holes on the back of the IC755CKS06RDMEP terminal, which should be used with M4 screws that are 6 millimeters or less. The mounting torque range for this terminal is between 0.7 and 0.8 N-m. Other specifications of this device include DRAM with a capacity of 512 MB and a 1 gigahertz ARM A* processor. This terminal also comes with a touchscreen with a TFT display measuring 5.7 inches, as well as USB, Ethernet, and serial interface communication ports.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.