GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC755CKW07CDM IC755CKW07CDMAIC755CKW07CDMBIC755CKW07CDMCIC755CKW07CDMDIC755CKW07CDMEIC755CKW07CDMFIC755CKW07CDMGIC755CKW07CDMHIC755CKW07CDMIIC755CKW07CDMJIC755CKW07CDMKIC755CKW07CDMLIC755CKW07CDMMIC755CKW07CDMNIC755CKW07CDMOIC755CKW07CDMPIC755CKW07CDMQIC755CKW07CDMRIC755CKW07CDMSIC755CKW07CDMTIC755CKW07CDMUIC755CKW07CDMVIC755CKW07CDMWIC755CKW07CDMXIC755CKW07CDMYIC755CKW07CDMZ
QuickPanel+ 7 inch with RSTi Modbus TCP
The GE Fanuc IC755CKW07CDM interface terminal is a QuickPanel+ operator interface terminal with the RSTi Modbus TCP. The processor on the terminal is the Freescale i.MX535 processor which is based on ARM Cortex A8 technology. The processor clock speed is 1 GHz. The amount of RAM on the system is 512 MB and the type of RAM is the DDR2 RAM. The IC755CKW07CDM interface terminal also includes 256 MB of NAND memory and 512 KB of SRAM with battery backup. The operating system on the IC755CKW07CDM interface terminal is the Windows Embedded Compact 7 operating system. The terminal display is a 7-inch widescreen TFT LCD with 800 x 480 pixels of resolution which supports 65,536 colors and is rated for 310 Nits of brightness. The display backlight is an LED. The display supports 2-point multi-touch control and it is based on projected capacitive technology.
The communications interfaces on the IC755CKW07CDM interface terminal include one Ethernet interface with an RJ-45 port, one RS-232 serial UART port with a 5-pin connector, 2 USB 2.0 Type A host ports which are rated for 5 Volts at 5 Amps of current, and one USB 2.0 mini Type B device port. One SD/SDHC card slot is also available on the IC755CKW07CDM interface terminal and it can be used for external storage. Audio ports on the terminal include one 3.5-millimeter port for the microphone input and one 3.5-millimeter audio port for the line out. The IC755CKW07CDM interface terminal is designed to operate at 24 Volts DC and it consumes 0.625 Amps of current which equates to a maximum of 15 Watts of power. The approximate weight of the terminal is 1.76 pounds and it measures 7.56 x 5.39 1.42 inches. A cutout measuring 2.77 x 5.06 inches is required for terminal installation.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.