GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the ST-2624 ST-2624-ST2624AST-2624-ST2624BST-2624-ST2624CST-2624-ST2624DST-2624-ST2624EST-2624-ST2624FST-2624-ST2624GST-2624-ST2624HST-2624-ST2624IST-2624-ST2624JST-2624-ST2624KST-2624-ST2624LST-2624-ST2624MST-2624-ST2624NST-2624-ST2624OST-2624-ST2624PST-2624-ST2624QST-2624-ST2624RST-2624-ST2624SST-2624-ST2624TST-2624-ST2624UST-2624-ST2624VST-2624-ST2624WST-2624-ST2624XST-2624-ST2624YST-2624-ST2624Z
The ST-2624 has been replaced with the ST-2524. Price is the same with added diagnostics. 4 points, Positive Logic, 24VDC/ 2A
The GE Fanuc ST-2624 module is a digital output module from the PACSystems RSTi series that is part of the GE Intelligent Platforms product line. This module has 4 output points that are source-type (positive logic) outputs. It has field power with a supply voltage rating of 24 Volts DC nominal, an operating voltage range of 11 to 28.8 Volts DC, and a power dissipation rating of 5 milliamps at 28.8 Volts DC per channel. The module contains an on-state voltage drop of 1 Volt DC at 25 degrees Celsius, an on-state minimum current of 1 milliamp for every channel, and an off-state leakage current of 150 uA. The GE Fanuc ST-2624 module has output protection as well as ESD protection (5 kilovolts), over-current and under-current limit protection (the overcurrent limit is 15 Amps and the undercurrent limit is 6 Amps per channel), short circuit protection, and over-temperature protection for temperatures above 150 degrees Celsius.
The GE Fanuc ST-2624 output module has an output signal delay of 0.3 milliseconds for both off to on and on to off. It requires an I/O cable that is a 2.0 square millimeters (AWG 14) cable for wiring and it is made to be mounted on a DIN rail. It has 4 green indicators to show the state of the outputs and one re/green indicator to display the Fn-BUS state. The GE Fanuc ST-2624 output module has an operating temperature range between -4 and 131 degrees Fahrenheit and a non-operating temperature range of -40 and 185 degrees Fahrenheit. The GE Fanuc ST-2624 output module weighs 70 grams and has dimensions (L x W x H) of 12 millimeters x 99 millimeters x 70 millimeters.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.