GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the ST-2742 ST-2742-ST2742aST-2742-ST2742bST-2742-ST2742cST-2742-ST2742dST-2742-ST2742eST-2742-ST2742fST-2742-ST2742gST-2742-ST2742hST-2742-ST2742iST-2742-ST2742jST-2742-ST2742kST-2742-ST2742lST-2742-ST2742mST-2742-ST2742nST-2742-ST2742oST-2742-ST2742pST-2742-ST2742qST-2742-ST2742rST-2742-ST2742sST-2742-ST2742tST-2742-ST2742uST-2742-ST2742vST-2742-ST2742wST-2742-ST2742xST-2742-ST2742yST-2742-ST2742z
GE ST2742 RSTi output module Isolated Relay Output 2 points, 230V AC/ 2A GE-IP
Beijer Electronics manufactures the ST-2742 module as an expansion module with 2 relay outputs with a current rating of 2 Amps and a maximum voltage of 250 Volts AC. The module features an I/O connector with a removable terminal block and a cage clamp and it is mountable on a 35-millimeter DIN rail. A dual indicator system gives the module 2 green output indicators and a single green or red bus indicator. The current and power consumption ratings are comparable with the same ratings from the other modules of this type. At 5.0 Volts DC, the current consumption rate is 65 milliamps, and the on-stage voltage drop is also 5.0 Volts DC at 2.0 Amps when there is a resistive load of 24 Volts DC. The system can delay for up to 10 milliseconds when switched on (the off to on output delay) and it takes approximately the same amount of time to power off (the on to off output delay).
The Beijer Electronics ST-2742 output expansion module has a weight of 65 grams, which makes it slightly lighter than similar modules whose weights are between 70 and 75 grams, and its mechanical dimensions are 12 x 99 x 70 millimeters at shipping. The environmental conditions required for operation include a non-condensing relative humidity range of 5 to 90 percent, and an operating temperature range of 20 degrees Celsius to 55 degrees Celsius. The ST-2742 output expansion module can be stored anywhere with a temperature range between 40 degrees Celsius and 85 degrees Celsius. The output relay lifetime of the ST-2742 module is gauged at 300 cycles of resistivity and 100 cycles of inductance.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.