GE / IP FANUC Series 90/30 In Stock
RSTi analog input module 4 Channels, 0~5Vdc, 14-bit
The GE Fanuc ST-3644 module is an analog input module from the PACSystems RSTi series, and it is part of the GE Intelligent Platforms product line. It has 4 input channels that are single-ended and non-isolated. It has an input voltage between 0 and 5 Volts DC and power dissipation of 200 milliamps at 5.0 Volts DC. The input module has a conversion time of 4 milliseconds for all channels and an input impedance rating of 500 Ohms. The benefits of using the ST-3644 analog input module include high levels of performance, reduced development time, increased uptime, reduced installation costs, easy upgrades, network independence, lower cost per point, and system simplification. The module has a locking mechanism that secures it to the DIN rail. For wiring, it has a simple spring clamp terminal that does not need special tools. The module’s removable terminal blocks allow for easy maintenance and installation.
The GE Fanuc ST-3644 analog input module is meant to be wired with an I/O cable measuring 2.0 square millimeters. It has 1 green/red indicator to show the Fn-BUS state and 4 red/green indicators to show the input states. The input module has a resolution range of 12 bits and a data format with 16 bits integer. The GE Fanuc ST-3644 analog input module has a module error margin of -/+0.1% full scale at 25 degrees Celsius and -/+0.3% full scale at 0 degrees Celsius and 60 degrees Celsius. The module has a weight of 0.07 kilograms and dimensions 1.2 x 9.9 x 7 centimeters. It has an operating temperature ranging from 0 to 60 degrees Celsius, a maximum operating altitude of 2000 meters, and a non-condensing humidity range between 5 and 90%.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.