GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the ST-4114 ST-4114-ST4114aST-4114-ST4114bST-4114-ST4114cST-4114-ST4114dST-4114-ST4114eST-4114-ST4114fST-4114-ST4114gST-4114-ST4114hST-4114-ST4114iST-4114-ST4114jST-4114-ST4114kST-4114-ST4114lST-4114-ST4114mST-4114-ST4114nST-4114-ST4114oST-4114-ST4114pST-4114-ST4114qST-4114-ST4114rST-4114-ST4114sST-4114-ST4114tST-4114-ST4114uST-4114-ST4114vST-4114-ST4114wST-4114-ST4114xST-4114-ST4114yST-4114-ST4114z
GE ST4114 RSTi analog output module 4 Channels, 020mA 12bit GE-IP
The GE Fanuc ST-4114 analog output module is a 12-bit, 4-channel analog output module from the GE RSTi distributed I/O system. The GE RSTi distributed I/O system is a family of high-performance and modular I/O system components that offers cost-effective PROFIBUS-based I/O solutions to a wide range of industrial applications. The ST-4114 analog output module, like every RSTi I/O module, is addressed, programmed, and configured by using the GE Windows-based Proficy ME programming software, which provides an easy-to-use configuration environment for programming all of the module’s parameters. The ST-4114 analog output module is installed on a DIN rail by using the slide and lock mechanism that allows for easy installation on the DIN rail.
The ST-4114 analog output module has 4 individually isolated single-ended output circuits with 0 to 20 milliamps of output current range and a resolution of 12 bits (4.88 milliamps per Bit). Each output channel has its own common and it does not require extra field calibration. Each output circuit also has a maximum load resistance of 500 Ohms and transmits output data in the 16-bit (2’s compliment) format. The ST-4114 analog output module has a maximum conversion time of 4 milliseconds (all channels) and a module error range of +/-0.3% full scale at 60 degree Celsius. The ST-4114 analog output module requires a user-supplied 24 Volts DC power supply for operation. It has an operating output voltage range of 18 to 28.8 Volts DC and a total current rating of 60 milliamps at 24 Volts DC. The ST-4114 analog output module has photo-coupler isolation between the I/O and control logic, and it uses the 2.0 millimeters square wire for module wiring.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.