1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.5/5 Based on 6 ratings.

Rate your purchase of the ST-4214
GE ST4214 RSTi analog output module 4 Channels, 420mA, 12bit GE-IP | Image

SKU 2178131  UPC 0799705804906




4 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

GE ST4214 RSTi analog output module 4 Channels, 420mA, 12bit GE-IP

Technical Information

The GE Fanuc ST-4214 analog output module is a 4-channel, 12-bit analog output module designed for the high-performance and low-cost GE RSTi I/O system. This module belongs to the analog I/O module family of the RSTi distributed I/O system that is designed for high performance, increased uptime, and low-cost I/O solutions. The ST-4214 analog output module, like every RSTi I/O module, is configured and addressed by using the Windows-based Proficy Machine Edition configuration software. On the front panel of this module is an LED light that shows the RSTi bus status and a color-coded label for easy device identification. The ST-4214 analog output module has a removable type of terminal block with spring clamp terminals for easy wiring.


The ST-4214 analog output module uses a 24 Volts DC user-supplied power source for output control. It has an acceptable operating output voltage range that is between 18 and 28.8 Volts DC and a maximum current rating of 60 milliamps at 24 Volts DC. This module has a recommended cable size of 2 millimeters square for module wiring, and it also offers photo-coupler type isolation between the I/O and control logic. The ST-4214 output module has 4 single-ended output channels that are individually isolated and with individual commons. Each output point has an output range of 12 bits (3.9 milliamps per bit) and an output current range of 4 to 20 milliamps. The output data is received in a 16-bit (2’s compliment) format from a controller, and this module has a total conversion time of 4 milliseconds. The ST-4214 analog output module has a maximum load resistance of 500 Ohms per channel and an overall module error range of +/-0.3% full scale at 60 degrees Celsius.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.