1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 13 ratings.

Rate your purchase of the ST-4422
GE ST4422 RSTi analog output module 2 Channels, 010Vdc, 12-bit GE-IP | Image

SKU 2173350  UPC 0799705804913




7 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

GE ST4422 RSTi analog output module 2 Channels, 010Vdc, 12-bit GE-IP

Technical Information

The GE Fanuc ST-4422 analog output module is a 4-channel analog output module from the GE Intelligent RSTi system. The GE RSTi system is part of a family of PROFINET-based modular distributed I/O systems that offers high performance, reduced operation costs, and increased uptime. The ST-4422 analog output module features front panel LEDs that show the module and Bus status updates. It also features a color-coded label for easy identification and individually-numbered pin connector points. The ST-4422 analog output module has a removable terminal block and push-type spring clamp terminals for simplified wiring and installation. It has a slide and lock mechanism that allows for easy and secure mounting on a DIN rail.


The ST-4422 analog output module has 2 single-ended output circuits that are not isolated between the channels and a single common between 2 channels. Each output circuit has an operating voltage range that is between 0 and 10 Volts DC and minimum resistance of 5.0 Kilo-Ohms per channel. The ST-4422 analog output module has 12 bits of output resolution (at 2.44 milliVolt/Bit) and an error range of +/-0.1% full scale at 25 degrees Celsius. It receives output data in a 16-bit (2’s complement) format and it has a maximum conversion time of 2.0 milliseconds (all channels). The ST-4422 analog output module does not have a built-in diagnostics feature, and it does not require additional field calibration. This module requires a system-supplied 24 Volts DC power source for operation, and it draws 155 milliamps of backplane current at 5 Volts DC input voltage. It offers photo-coupler isolation between the I/O and logic and it requires the 2.0-millimeter I/O cable for wiring.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.