1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

ST-4622

Rated 4.6/5 Based on 5 ratings.

Rate your purchase of the ST-4622

GE ST4622 RSTi analog output module 2 Channels, 05Vdc, 12-bit GE-IP | Image

GE ST4622 RSTi analog output module 2 Channels, 05Vdc, 12-bit GE-IP | Image GE ST4622 RSTi analog output module 2 Channels, 05Vdc, 12-bit GE-IP - Wiring Diagram Image

SKU 2177141  UPC 0799705804944

Submit RFQ for ST-4622





Other Available Revisions for the ST-4622 -a-b-c-d-e-f-g-h-i-j-k-l-m-n-o-p-q-r-s-t-u-v-w-x-y-z

Common misspellings:
  • ST-A622
  • ST4622

GE ST4622 RSTi analog output module 2 Channels, 05Vdc, 12-bit GE-IP

Technical Information

The GE Fanuc ST-4622 output module is an analog output module. The ST-4622 output module has 2 output channels that are each rated for 0 to 5 Volts DC. The resolution of the channels on the ST-4622 output module is 12 bits. The ST-4622 output module is designed for use with the PACSystems RSTi platforms. Numerous other I/O modules can also be used with the RSTi platform including digital I/O, network interface units, PID loop controllers, serial interface modules, motion modules, and system modules. The ST-4622 module requires 24 Volts DC power. A total of 8 pins are available on the front panel of the ST-4622 output module: Pins 0 and 1 correspond to Output Channel 0 and Output Channel 1, Pins 2 and 3 are not connected, Pins 4 and 5 are common pins rated at 0 Volts, and Pins 6 and 7 are shield/chassis ground pins.

 

The ST-4622 output module mounts on a DIN rail and it can be installed in either a horizontal or vertical orientation. The maximum wire size recommended by GE Fanuc for use with the module is 14 AWG. The environmental protection rating of the module is IP 20. The isolation rating of the module is 1500 Volts AC for up to 1 minute. During storage and transportation, the temperature of the air surrounding the module should not be less than -40 degrees Fahrenheit and it should not exceed 185 degrees Fahrenheit. Likewise during operation, the temperature of the air surrounding the module should not be less than 32 degrees Fahrenheit and it should not exceed 140 degrees Fahrenheit. The ST-4622 I/O module is certified by the CE and UL/cUL standards.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.