1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

ST-5444

Rated 4.7/5 Based on 8 ratings.

Rate your purchase of the ST-5444

GE Intelligent Platforms / GE Fanuc - RSTi PacSystem - ST-5444

GE Intelligent Platforms / GE Fanuc - RSTi PacSystem - ST-5444

SKU 0  UPC 00

Submit RFQ for ST-5444





Other Available Revisions for the ST-5444 ABCDEFGHIJKLMNOPQRSTUVWXYZ

Common misspellings:
  • ST-5A44
  • ST-54A4
  • ST-544A
  • ST5444

RSTi PWM Out module, 0.5A/24V, Source, 4 Channels, 2.5Khz

Technical Information

The ST-5444 Motion Control Module is a PACSystems RSTi 4-Channel, PWM output motion control module made by GE Fanuc. It is used for providing pulse width modulation facilities for simple motion control applications. The specifications of the field power for the module are 18 to 28.8 Volts DC of voltage range, 24 Volts DC of power supply voltage, and 50 milliamps of power dissipation at 24 Volts DC. It offers short-circuit protection diagnostic facilities, a PWM drive type, and 2500 Hertz of PWM frequency. The ST-5444 Motion Control Module does not support encoders. Its indicator LEDs help the users to easily determine the health of the channels and diagnose system failures.

 

The ST-5444 Motion Control Module comes with 4 channels with a positive logic type. The 4 PWM output channels are connected to Pins 0, 1, 2, and 3 of the terminal assembly, respectively. Each channel has an indicator LED to show the visible status of the channel. Another green/red LED shows the RSTi bus status. The power dissipation rating of the module is 150 milliamps at 5 Volts DC. The ST-5444 Motion Control Module has 0.5 Amps of output current per channel and 1.5 Amps of maximum inrush current. It is designed for providing integrated mechanical interlocking. The terminal assembly consists of spring clamps that accept 14 AWG wires. It supports plug and play installation and no tools are required for removal. It weighs 70 grams. It is advised to mount the module in an ATEX certified enclosure with an IP 54 protection level. This module processes pulse signals for industrial control applications.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.