1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 11 ratings.

Rate your purchase of the ST-7408
GE ST7408 RSTi Potential Distribution module for Shield module, with module ID type with LED.  Termi

SKU 2174111  UPC 0799705805170




8 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

The ST-7408 or Shield Signal Smart Module, is a power module with 8 channels manufactured by GE Fanuc. The 8 channels are all shielded and are numbered 0 through 7. In addition to being a smart module, one that uses module ID, the ST-7408 is equipped with an active lifecycle status. 

This ST-7408 power module supports a maximum current load of 10 amps per point. It does not consume more than 18mA of internal power when operating at 5 VDC. ST-7408 is 88mm high, 12mm wide, and 70mm deep. It uses a spring clamp terminal block connector type. The wiring consists of a max 2.0 mm2 input/output cable (AWG 14). The module has a maximum weight of 70g and its size dimensions are 12mm x 99mm x 70mm. The ST-7408 weighs 70g.

The LED light present on it is indicative of its status. When the status LED is OFF that means the device has no expansion module or power. When the LED is not initialized, it indicates that the Parameter has not been initialized yet. Green status lights means that the FnBus connection is in normal operation. The light is flashing green when the FnBus is ready. Flashing red on the other hand indicates a failed communication to the FnBus. When the status LED light is lit in solid red that means that there is a device fault present. 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.