1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC694ALG220A
SKU 2171267 UPC 0799705802438
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Product Description
IC694ALG220 is a 4–Channel Analog Voltage Input Module manufactured by GE Fanuc. It provides four analog input channels and accepts inputs in the range of -10 to +10 volts. Individual channels can be used with 4 to 20 mA inputs by jumpering the input terminals. Conversion speed for each channel is one millisecond providing an update rate of four milliseconds for any channel. This module can be installed in any I/O slot of an RX3i PLC system.
If the IC694ALG220 is located in an RX3i Universal Backplane, an external source of Isolated +24 VDC is needed to provide power for the module. The external source must be connected by way of the TB1 connector on the backplane’s left side. If this module is located in an Expansion Backplane, the power supply provides the Isolated +24 VDC output required. When the power supply is operating as expected, the Module OK LED will show ON.
All field connections to the module should be wired using a suitable grade of twisted, shielded instrumentation cable. This will minimize capacitive loading and noise. The shields can connect to either COM or GND. The COM connection provides access to the common of the analog circuitry. The GND connection provides access to the backplane (frame ground). Additionally, the (-) side of the voltage source can be tied to the COM terminal if the source is floating to limit common-mode voltages.
Technical Specifications
| No. of channels: | 4 Inputs |
| Voltage Range: | -10 to +10 volts DC |
| Calibration: | Factory calibrated |
| Update Rate: | 4 msec |
| Input Filter Response: | 17 Hz |
| Power Consumption: | 27 mA @ +5VDC and 98 mA @ +24VDC Isolated |
The RX3i PACSystems features a high performance controller with a 300 MHz Intel® microprocessor and 10 Mbytes of user memory that eliminates the need for multiple controllers and simplifies control.
Common related search terms: Battery, Buy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.