GE / IP FANUC Series 90/30 In Stock
SKU 0 UPC 00
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC694ALG233 is a PACSystems RX3i Analog Current Input Module with 16 single-ended input channels. Each input is configurable using configuration software for three input ranges: 4 to 20 mA, 0 to 20 mA, and 4 to 20 mA Enhanced.
High and low alarm limits are offered on the three ranges. For the 4 to 20 mA Enhanced range, a low alarm limit can be initiated to detect input current from 4 mA to 0 mA; this provides open-wire fault detection in 4 to 20 mA Enhanced applications. Additionally, IC694ALG233 reports module status and status of the external power supply to the CPU via its assigned program reference addresses. IC694ALG233 must be installed in an I/O slot with a serial connector in an RX3i system.
The IC694ALG233 module is software-configurable, and there are no module jumpers to set. Open-circuit detection for all inputs is available in 4 to 20 mA Enhanced Range. Configurable scaling and offsets and fault reporting are other useful features. The module supports diagnostic point fault contacts in the logic program and supports upgrades for firmware. Positive and negative rate of change alarms as well as module serial number/revision/date code display are included. The module also supports hot insertion/removal.
Module status is easily determined by emitting LEDs as follows. ON means OK, and the module is correctly configured. OFF equates to no backplane power, or it’s possible that the software not running. If the LED emits continuous fast blinking, configuration data issues are present. Slow blinking followed by OFF indicates a failed power-up diagnostics issue or a code execution error has been encountered. The USER SUPPLY LED determines that the external 24 VDC supply is appropriate.
|Module Type:||Analog Current Input|
|Number of Inputs:||16 single-ended|
|Internal Power:||+5V: 120 mA|
|Number of Slots:||1 (single slot)|
|Current Range:||0-20 mA, 4-20 mA, 4-20 mA (Enhanced)|
|Backplane Support:||No backplane restrictions|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.