GE / IP FANUC Series 90/30 In Stock
SKU 2170060 UPC 0799705802391
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC694ALG390 is manufactured by GE Fanuc for the Rx3i PacSystem. The IC694ALG390 is a 2-channel analog module with two output channels and the capability to convert digital data. The channels update after each scan at an approximate update rate of 5 milliseconds. The IC694ALG390 module outputs can be configured to Default or Hold Last State if the CPU resets for any reason or enters stop mode.
The IC694ALG390 has a voltage range usage of -10 to +10 volts. The external voltage ranges from 18VDC to 30VDC with a 10% external voltage ripple. The module’s location is important when analyzing power sources. If the module is located in an RX3i Universal Backplane, an external source of Isolated +24 VDC is required to provide module power. If the module is located in an Expansion Backplane, its primary power source can be the Isolated +24 VDC from the backplane power supply or an external Isolated +24 VDC supply connected to the terminal block. If the external source is between 27.5-30 VDC, it takes over the module’s load from the Isolated 24 VDC system supply. An external source should be used if the user needs to maintain hold last state operation during a loss of backplane power.
Field connections should be wired using a decent grade of twisted, shielded instrumentation cable to minimize capacitive loading and noise. The shields should be connected to GND on the user terminal connector block. The GND connection provides access to the backplane (frame ground), which results in rejection of noise caused by shield drain currents.
|No. of channels:||2|
|Voltage Range:||-10 to +10 V|
|Calibration:||Factory (to 2.5 mV per count)|
|Update Rate:||5 msec|
|Output Load:||5 mA max|
|Power Consumption:||32 mA @ +5VDC, 120 mA @ +24VDC Isolated|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.