GE / IP FANUC Series 90/30 In Stock
SKU 0 UPC 00
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC694ALG542 Analog Current/Voltage Module is manufactured by GE Fanuc for PACSystems RX3i. The advanced diagnostics offer a mixed I/O analog current/voltage with four differential input channels. Additionally, two single-ended output channels are available. The configuration for each channel can be completed with the Machine Edition software for any of the following ranges: (0 to +10 volts) unipolar, (-10 to +10 volts) bipolar, 0 to 20 mA, or 4 to 20 mA. Moreover, input channels can be configured for an enhanced mode at 4-20 mA. Each individual output can be configured to either a Hold Last State or at the low end of the power range. This comes into effect if the system’s power in interrupted. Outputs are configurable as well. These can operate in ramp mode on command from the application program. In this mode, the output channel ramps to a new value over time, rather than an immediate new value. High and low limits can be set for each channel as well as an open wire fault reported to the CPU for each individual output channel.
Features available on the IC694ALG542 module include open circuit detection for each input in the enhanced range, configurable scaling and offsets per channel, and alarm detection and reporting per channel. Module fault reporting is also available on this module with support of full diagnostic point fault contacts in the logic program. Firmware upgrades are fully supported.
During installation and to ensure correct functioning, this module requires 150mA plus loop current from a user supplied 24Vdc external source. The module supports the insertion and removal from an RX3i universal backplane. This module has an update rate of 2ms.
|Module Type:||Analog Mixed I/O|
|Backplane Support:||No restrictions|
|# of Slots||1 (single slot)|
|Voltage Range:||0 to +10V, -10 to +10V|
|Current Range:||0 to 20mA, 4 to 20mA|
|Power Consumption:||95mA @ 5V, 150mA @ 24VDC external|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.