GE / IP FANUC Series 90/30 In Stock
The GE Fanuc IC694BEM331 Genius Bus Controller interfaces a PACSystems RX3i and a Genius I/O serial bus. In addition to the Bus Controller, the bus will also serve: Genius blocks, remote drops, VersaMax and Field Control I/O Stations, PLCs with Genius Bus, Genius Hand-Held Monitor (HHM), and numerous hosts. Featuring 128 bytes exchange with each device on the Genius I/O bus, the Genius blocks and other devices report faults in an automatic fashion, including alarms and certain other previously defined issues to the bus controller. The bus controller then manages any diagnostic messages it receives, which are then read by the CPU routinely. Faults can then be displayed in the fault table if the programming software is employed.
The IC694BEM331 maintains all Genius datagrams and can send up to 128 bytes of Global Data with each bus review. Global data is data that is spontaneously and mechanically broadcast. Up to eight Genius bus controllers can be incorporated in the system with each transferring up to 128 bytes.
LEDs are found on the front of the controller to specify operating status. With advanced diagnostic capabilities, the daisy chained bus cable uses a single twisted pair plus shield or Twinax. However, fiber optic cable and modems can also be used. The largest length of the bus is 7800 feet at 4Kbaud, 4500 feet at 76.8 Kbaud, 3500 feet at 153.6 Kbaud, and 2000 feet at 153.6 Kbaud standard. The highest number of devices for this unit is 32 at all baud rates except the 38.4 Kbaud or 16 devices at 38.4 Kbaud. The controller is well-suited with multiple series and can trade global data with an RX3i Genius bus controller with firmware version 1.5 or higher. The user should know that no handheld monitor connector is available on the module, but a handheld monitor can interconnect with the controller.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.