GE / IP FANUC Series 90/30 In Stock
SKU 2173427 UPC 0799705793415
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The "LT" Revision is for the PDF Supply Low Temperature Testing Service. PDF Supply warranty will apply. A $150 service charge will be added at checkout.
IC694DNM200 is a GE Fanuc manufactured DeviceNet Master Module for the RX3i series. The single-slot module enables the CPU to send and receive information over the DeviceNet network. It can server as a master to 63 “slaves” on the network. Moreover, it can also be configured to act as a slave to another master module located on the bus. The module can be installed on any I/O slot in the RX3i or 90-30 series backplane. It is compatible with any CPU in the 90-30 series as well as PACSystems Rx3i CPU model IC695CPU310 release 3.5 and later. It is not compatible with VersaPro or LogicMaster programming software or the 90-30 series handheld programmer IC693PRG300. The IC694DNM200 master module is compatible with any CPU in the 90-30 series with exception of IC693CPU321 or IC693CPU340 release 8.0 and later firmware.
The IC694DNM200 runs on DeviceNet protocol and 5 VDC with a current of 450mA. It supports baud rates of 125K, 250K, and 500K of the DeviceNet network. On the master module, be sure to locate 3 LEDs that display communication and operating status. They are labeled Net Power, Mod Status and Net Status. Directly below the LEDs is the sSerial port RS-232 used for connecting the master module to a PC during firmware updates. Devices are connected to the trunk cable or to drop lines, which are joined to the trunk cable with taps. Taps are mountable on panels or junction boxes. Recommended module storage ranges from -40oC to 85oC with operating temperatures of between of 0oC and 60oC.
|Module Type:||DeviceNet Master|
|Number of Slots:||1 (single slot)|
|Backplane Support:||CPU rack only|
|Internal Power:||450 mA @ 5 VDC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.