GE / IP FANUC Series 90/30 In Stock
SKU 2173349 UPC 0799705793408
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC694DSM314 is a Multi-Axis Motion Controller Module manufactured by GE Facuc for the Rx3i PacSystem series. It combines optimum motion control with logic-solving functions expected from the Rx3i PACSystem. It supports two control loop configurations, including Standard Mode (Follower Control Loop Disabled) and Follower Mode (Follower Control Loop Enabled).
The IC694DSM314 module can be used with GE Fanuc α Series and β Series digital servo amplifiers and motors as well as some others. Module features include velocity feed forward and a position error integrator; high resolution of programming units; simple 1 to 4-axis motion programs; and non-volatile storage, which can be used for up to 10 programs and 40 subroutines. The module comes equipped with a single-point of connect for proper programming and configuration. Flash memory allows firmware storage and updates. IC694DSM314 has electronic CAM capability and a variety of inputs for each axis.
This control module has a 13-bit analog output that can be controlled by the PLC or used as a digital servo tuning monitor. An additional feature is high speed digital output via on-board local logic control (four each 24V and four each 5V). The IC694DSM314’s power supply is 5 VDC from the backplane and 800mA plus encoder supply current. Seven LEDs on the module indicate status. The STAT LED is generally on, which suggests normal operation. If the LED is OFF, the module is not functioning. Status errors are indicated by repeated slow blinking. Rapid blinking, however, suggests errors that will stop operation of the servo. It is important to note that the IC694DSM314 must be connected to the frame ground by way of the terminal located on the bottom of the module.
|Module Type:||Servo Motion|
|Number of Slots:||1 (single slot)|
|Backplane Support:||Universal Backplane|
|Analog Inputs:||4-In digital mode, 8-In analog mode|
|Analog Outputs:||4-In digital mode, 0-In analog mode|
|Power Consumption:||1300 mA @ 5 VDC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.