GE / IP FANUC Series 90/30 In Stock
SKU 2178331 UPC 0799705793392
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC694DSM324 is a GE Fanuc motion controller module belonging to the Rx3i PACSystem. It’s a multi-axis module, which will support standard mode (follower control loop disabled) and follower mode (follower control loop enabled).
The modules come with electronic CAM functionality, an analog I/O port that is used for connection to a PC, and switch inputs for every servo axis. For programming and configuration purposes, the module uses a single point of connection with firmware being saved in flash memory and updated through the COMM port. Storage is non-volatile and can hold up to 10 programs as well as 40 subroutines. Furthermore, it comes with a powerful set of motion program instructions designed for use by 1 to 4 axes.
The IC694DSM324 is equipped with eight LED indicators for displaying the status of the module. The STATUS LED is usually ON, which means the device is working properly. If the LED goes out, this indicates an error and a non-functional module. During module configuration, the CONFIG LED is ON. The FSSB LED is ON when there are FSSB communications and BLINKS during setup. There are also axis-enabled LEDs that come ON when axis 1 to 4 drives are enabled.
The FSSB connector allows for fiber connection to servo amplifiers for command / instructions exchange and diagnostics. It normally has a protection cap to avoid damage. The RJ-11 COMM port is used for downloading of firmware updates. The module also comes with two ports for 24 VDC and 5 VDC power. Pre-manufactured cables come in 1 meter and 3 meter lengths. The IC694DSM324 should be connected to frame ground using the ground terminal located at the bottom of the module. The recommended grounding resistance should be 100 ohms or less.
|Module Type:||Servo Motion|
|Number of Slots:||1 (single slot)|
|Backplane Support:||Universal Backplane|
|Power Consumption:||1360 mA @ 5 VDC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.