PDF Electric and Supply



Buy NowIC694MDL230
IC694MDL230 Wiring

Rated 4.4/5 based on 9 ratings.
  • IC694MDL230
  • IC694MDL230 Wiring

Product Description

The IC694MDL230 is 120-volt, 8-point Isolated Input Module manufactured by GE Fanuc belonging to the RX3i PACSystems series. Each of the eight points is powered separately by an AC source. The input voltage range spans from 0 to 132 VAC running at an input current of 14.5 mA with a frequency of 50/60 Hz. With all inputs turned ON, the module’s power consumption is 60 mA provided by a 5 VDC bus located on the backplane.

The IC694MDL230 has reactive input circuits, meaning the circuits are comprised of both resistors and capacitors. The module’s input characteristics allow compatibility with variety of devices such as limit switches, push buttons, and proximity switches. Power for the IC694MDL230 is supplied by the user. It is important to note that the module runs only on AC power; DC power is not applicable.

The module has eight green LEDs located on the block, which are used to indicate the ON or OFF status of the eight points. Red bands on the block warn the user that the IC694MDL230 is a high voltage input module. The module is installable on any slot in the Rx3i system.

Technical Specifications

Rated Voltage:  120 volts AC
# of Inputs: 8 (isolated)
Freq: 50/60 Hz
Input Current: 14.5 mA
Input Voltage Range:  0 to 132 volts AC 
Power Consumption:   60 mA from 5 V bus 


GE Intelligent Platforms / GE Fanuc GE RX3i PacSystem

SKU 2178249  UPC 0799705793385

Part Number: IC694MDL230 / ic694mdl230
Mfr/Brand Name: GE Automation
Mfr Number: IC694MDL230 / ic694mdl230
Type: 120 volt AC Input Module, 8 Isolated Points

Troubleshooting and Product Information for IC694MDL230

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC694MDL230
Price: $225
36 In Stock
1 Year Warranty

*Need a Specific Revision?

New Surplus IC694MDL230
Price: $194
7 In Stock
3 Year PDF Supply Warranty

*What is New Surplus?

Reman IC694MDL230
Price: $110
In Stock

2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Your IC694MDL230
Price: $100
1 Year PDF Supply Warranty
Call For Assistance

Other IC694MDL230

Available Revisions:

Confirm Your Revision Number

1C694MDL230 , GEFIC694MDL230 , CIMIC694MDL230


Rated Voltage

Input Voltage Range

120 Vac, 50/60 Hz

0 to 132 Vac, 50/60 Hz

Inputs per Module

8 (each input point has a separate common)



Field to Backplane (optical) and to frame ground

250 Vac continuous; 1500  Vac for one minute

Point to Point

250 Vac continuous; 1500  Vac for one minute

Input Current

14.5 mA (typical) at rated voltage

Input  Characteristics:

Onstate Voltage Offstate Voltage Onstate Current Offstate Current On response Time Off  response Time


74 to 132 Vac

0 to 20 Vac

6  mA minimum

2.2 mA maximum 30 ms maximum 45 ms maximum

Power Consumption

60 mA (all inputs on) sourced from 5 Vdc bus on backplane

Troubleshooting IC694MDL230

Troubleshooting information is available on IC694MDL230's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC694MDL230

PDF Supply can repair your IC694MDL230 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC694MDL230?  Answer:  The IC694MDL230 is an 8-Point, 120 Volt AC, Isolated Input module from the GE Fanuc RX3i Series.
  • Question:  What does IC694MDL230 provide?   Answer:  IC694MDL230 provides 8 isolated input points, each with a common power input terminal. 
  • Question:  What kind of input circuits does IC694MDL230 have?   Answer:  They are reactive (resistor/capacitor) inputs. 
  • Question:  What is the result when current gets put into an input point?   Answer:  This will result in a logic 1 in the input status table (%I).
  • Question:  With what are the input characteristics compatible?   Answer:  They are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
  • Question:  From where must power to operate the field devices be supplied?   Answer:  Power to operate the field devices must be supplied by the user.
  • Question:  What kind of power source does IC694MDL230 require?   Answer:  This module requires an AC power source; it can NOT be used with a DC power source.
  • Question:  The 8 green LEDs indicate what?   Answer:  They indicate the ON/OFF status of points 1 through 8.
  • Question:  The red bands on the label show what?   Answer:  They show that IC694MDL230 is a high-voltage module. 
  • Question:  Into what slot should IC694MDL230 be installed?   Answer:  IC694MDL230 can be installed in any I/O slot of an RX3i system. 
  • Question:  What should I do if my IC694MDL230 is not working properly?   Answer:  Your IC694MDL230 may need repair

For more information on the IC694MDL230 8-Point, 120 Volt AC, Isolated Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual. 


Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.

Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.

Free Overnight delivery on orders over $500!

What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.

Free Overnight delivery on orders over $500!

What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!

What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.

Free Overnight delivery on orders over $500!

Download Lastest Documentation

Please visit this manufacturer's website to download the lastest manuals and datasheets.

Lowest Price Guarantee

We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping

FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.