GE / IP FANUC Series 90/30 In Stock
SKU 2177021 UPC 023961662223
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Fanuc IC694MDL260 is a 32-point Input Module for the Rx3i PACSystem. The 120 VAC module is equipped with 32 discrete input points that are arranged in four isolated groups of eight. Isolation is demonstrated between the four input groups, and all inputs within a group are referenced to the same user common connection. The IC694MDL260 module can be used terminal blocks, including: box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), or extended spring-style (IC694TBS132). Extended blocks allow added shroud depth generally necessary for field wiring to AC devices. Note: The terminal block is ordered separately.
Input filter times are set from the programmer using assigned output data references. Individually-numbered LEDs relay the ON/OFF status of points 1-32. The red/green TB LED is green when the removable terminal block is safely locked in place. It shows red when the block is not properly locked. The module also sends a status message to the RX3i CPU. Red bands on the label warn the user that the IC694MDL260 is a high-voltage module. This module can be installed in any I/O slot in an RX3i system. It should be used with an RX3i CPU (3.50 release or greater) and is not compatible with a Series 90-30 PLC CPU. The IC694MDL260 has a rated voltage of 120 volts AC with an input voltage range of 0 to 132 VAC (or 47-63Hz). Input filter times are 20ms to 254ms in 20ms increments sent from the CPU. Input current is 7.0 mA per point at rated voltage typically. Power consumption is 220 mA at 5VDC with all inputs ON.
Rated Voltage: | 120 volt AC |
# of Inputs: | 32 (4 isolated groups of 8) |
Freq: | 50/60 Hz |
Input Current: | 7 mA at rated voltage |
Input Voltage Range: | 0 to 132 VAC |
Power Consumption: | 220 mA from 5V bus |
Common related search terms: Battery, Buy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.