GE / IP FANUC Series 90/30 In Stock
Call Now
1-800-360-6802
Mon-Fri 8AM-5PM EST
1-919-535-3180
IC694MDL660
SKU 2178153 UPC 0290823026305
MSRP $386
Product Description
The IC694MDL660 is a 32-Point, 24 VDC, Positive/Negative Logic, Input module from the GE Fanuc RX3i Series. This module provides 32 discrete input points. The inputs are positive or negative logic inputs and will operate at levels up to 30V. See specifications for this unit on IC694MDL660's website page.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 32 (4 isolated groups of 8) |
| Freq: | N/A |
| Input Current: | 7 mA |
| Input Voltage Range: | 0 to +30VDC |
| Power Consumption: | 330 mA from 5V bus |
Technical Information
Specification
|
Rated Voltage |
24 volts DC |
|
Input Voltage Range |
0 to 30 volts DC |
|
Inputs per Module |
32 (four isolated groups of 8 inputs) |
|
Isolation, Field to Backplane (optical) |
250 VAC continuous; 1500 VAC for one minute |
|
Isolation, Group to Group |
250VAC continuous; 1500 VAC for one minute |
|
Input Current |
7.0 mA per point (typical) at rated voltage |
|
Module ID |
0x058h |
|
Input Characteristics: |
|
|
On–state Voltage |
11.5 to 30 VDC |
|
Off–state Voltage |
0 to 5 VDC |
|
On–state Current |
3.2mA minimum |
|
Off–state Current |
1.1mA maximum |
|
Input Filter Times |
0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms, selectable per module |
|
On response Time |
0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
|
Off response Time |
0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
|
Power Consumption |
300mA (all inputs on) from 5 volt bus on backplane |
|
Diagnostics |
Terminal block presence reported to RX3i CPU |
Troubleshooting
Troubleshooting IC694MDL660
Troubleshooting information is available on IC694MDL660's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL660
PDF Supply can repair your IC694MDL660 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
The definition of Module Status Data for IC694MDL660
Description
In GFK2314D, the description for 16 bit Module Status data of IC694MDL660 is as following:
Bit 1~9 for Internal use
Bit 10 Module I/O Data: 1=ready. 0= not ready
Bit 11 Terminal Block Present: 1=TB not present, 0=TB present
Bit 12~16 not used.
Why is Bit 10 set to 0 and the module works well and is providing the correct input data to CPU.
Resolution
GFK2314D currently specifies the meaning for bit 10 to be “Module I/O Data: 1-ready, 0-not ready”. This is true ONLY for version “A” of the module (IC694MDL660A).
For versions “-AB” and “-BC” (IC694MDL660-AB, IC694MDL660-BC) the meaning of this bit should be “Firmware Update Mode: 1 = module waiting for firmware update".
Customer Questions and Answers
- Question: What is an IC694MDL660? Answer: The IC694MDL660 is a 32-Point, Positive/Negative Logic, 24 VDC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL660 provide? Answer: This module provides 32 discrete input points in 4 isolated groups of 8 each.
- Question: How can the module be wired? Answer: This input module can be wired for either positive or negative logic.
- Question: How many selectable input filter times are there? Answer: This module provides seven selectable input filter times which can be set from the programmer using the module's assigned output data references.
- Question: What terminal blocks are used with this module? Answer: This module can be used with either a Box-style (IC694TBB032) or Spring-style (IC694TBS032) front Terminal Block. The terminal block is sold separately.
- Question: 32 green LEDs indicate what? Answer: 32 green LEDs indicate the ON/OFF status of points 1 through 32.
- Question: The blue bands on the label let you know what? Answer: They let you know that IC694MDL660 is a low-voltage module.
- Question: Into what slot can IC694MDL660 be installed? Answer: This module can be installed in any I/O slot of an RX3i system. It must be used with an RX3i CPU (release 2.90 or later).
- Question: What should I do if my IC694MDL660 is not working properly? Answer: Your IC694MDL660 may need repair.
For more information on the IC694MDL660 32-Point, Positive/Negative Logic, 24 VDC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
Release |
Date |
Comments |
|
IC694MDL660-CC |
Jan 2016 |
Updated modules are RoHS converted product with applicable exemptions. No change in form-fit-functionality |
|
IC694MDL660-BC |
Nov 2005 |
Replaces all previous versions. |
|
IC694MDL660-AB |
May 2005 |
Compatible with PACSystems RX3i CPU 3.0 firmware or later. |
|
IC694MDL660A |
Mar 2005 |
Initial Release. Compatible with PACSystems RX3i CPU 2.9 firmware only. |
Common related search terms: Battery, Buy, Configuration, Datasheet, Dimension, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.