PDF Electric and Supply



Buy NowIC694PWR331
IC694PWR331 Wiring

Rated 4.3/5 based on 8 ratings.
  • IC694PWR331
  • IC694PWR331 Wiring

Product Description

The IC694PWR331 is a 24 volt DC, 30 Watt High Capacity Power Supply from the GE Fanuc RX3i Series. See specifications for this unit on IC694PWR331's website page.

Technical Specifications

Nominal Rated Voltage:   24 volt DC
Input Voltage Range: 12 VDC to 30 VDC
Input Power: 50 Watts
Load Capacity: 30 Watts
Module Type: Expansion Power Supply
Backplane Support: Remote Bases Only



GE Intelligent Platforms / GE Fanuc GE RX3i PacSystem

SKU 2175023  UPC 0314041441747

Part Number: IC694PWR331 / ic694pwr331
Mfr/Brand Name: GE Automation
Mfr Number: IC694PWR331 / ic695pwr331
Type: 24 volt DC High Capacity Power Supply

Troubleshooting and Product Information for IC694PWR331

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC694PWR331
Price: $288
4 In Stock
1 Year Warranty

*Need a Specific Revision?

New Surplus IC694PWR331
Price: $240
2 In Stock
3 Year PDF Supply Warranty

*What is New Surplus?

Repair Your IC694PWR331
Price: $155
1 Year PDF Supply Warranty
Call For Assistance

Other IC694PWR331

Available Revisions:

Confirm Your Revision Number

1C694PWR331 , GEFIC694PWR331 , CIMIC694PWR331


Nominal Rated Voltage Input Voltage Range



24 Vdc


18 to 30 Vdc

12 to 30 Vdc

Input Power

50 W maximum at full load

Inrush Current14

4 A peak, 100  ms, maximum


Output Power

5 Vdc: 30 W maximum (Derate per Figure 114)

24 Vdc Relay: 15 W maximum

24 Vdc Isolated: 20  W maximum

NOTE: 30 W maximum total (all three outputs)


Output Voltage

5 Vdc: 5.0 to 5.2 Vdc (5.1 Vdc nominal)

24 Vdc Relay: 19.2 to 28.8 Vdc

24 Vdc Isolated: 19.2 to 28.8 Vdc

Isolation (input to backplane)

1500 Vac (for 1 minute)

Protective Limits




5 Vdc output: 6.4 to 7 Vdc

5 Vdc output: 7 A maximum

Ride-through Time:

10 ms minimum. This is the length of time the power supply maintains valid outputs if the power source  is  interrupted


5 A, GE part number 44A724627-114.

Refer to Module Fuse List, Section

Troubleshooting IC694PWR331

Troubleshooting information is available on IC694PWR331's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC694PWR331

PDF Supply can repair your IC694PWR331 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.



Rx3i Power Supply affected when portable/mobile radio is activated


Applications where the RX3i PLC is exposed to RF energy, such as portable/mobile radios, may cause the power supply to shutdown when the radio is keyed. Specifically, we have observed radios operating in the 800 to 900 MHz range can cause this condition. Other frequencies may cause this condition as well where the field strength exceeds our specification.


Testing Conducted and Observations:

The field strength of the suspect radio was measured to be 59 V/m at 4cm from the antenna of the radio, 25 V/m at 1m from the antenna, and 11 V/m at 2m from the antenna. We design our systems to an IEC standard test rating specification of 10 V/m at the equipment under test. During the test with the radio, the RX3i power supply was unaffected by field strengths of 25 V/m or less, which is at least 2 1/2 times our design specification. At higher field strengths, the power factor correction circuit is affected, causing the power supply shutdown. For reference, the S90-30 AC power supply does not have this circuit, therefore they are not similarly affected. The tests were performed in a field strength chamber to insure consistent results.


We suggest placing the Rx3i system in a metal enclosure if using the AC power supply under these conditions. The RX3i DC supply, which uses a different design, was tested and works well under the same conditions.

Part Number reference:

Power Supply Type

Catalog Number

120/240 VAC, 125 VDC, 40 Watt Power Supply


120/240 VAC, 125 VDC, 40 Watt, Multi-Purpose Power Supply


24 VDC, 40 Watt Power Supply


24 VDC, 40 Watt Multipurpose Power Supply


120/240 VAC, 125 VDC, Serial Expansion Power Supply**


120/240 VAC, 125 VDC, High Capacity Serial Expansion Power Supply**


24 VDC, High Capacity Serial Expansion Power Supply**


** The Expansion power supplies listed are NOT affected by this condition.


Customer Questions and Answers

  • Question:  What is an IC694PWR331?  Answer:  The IC694PWR331 is a 24 VDC High Capacity, 30 Watt Power Supply from the GE Fanuc RX3i Series.
  • Question:  What does IC694PWR331 allow the 30 watts to do?  Answer:  For applications requiring greater +5 VDC current capacity than is available with a standard supply (IC694PWR321), this High-Capacity Power Supply allows all 30 watts to be consumed from the +5 VDC output. 
  • Question: From what input voltage source range does IC694PWR331 operate?  Answer:  This Power Supply operates from an input voltage source in the range of 12 to 30 VDC. (Although it is capable of maintaining all outputs within specifications with input voltages as low as 12 VDC, it does require an initial input voltage of 18 VDC to start up.)
  • Question: What outputs does IC694PWR331 provide?  Answer: 
    • +5 VDC output
    • Relay +24 VDC which provides power to circuits on Output Relay modules
    • Isolated +24 VDC, which is used internally by some modules. It can also be used to provide external power for 24 VDC input modules.
  • Question:  Can IC694PWR331 be installed in an Expansion Backplane in an RX3i system?  Answer:  Yes, but the battery backup and serial port functions are not available in Expansion Backplanes.
  • Question:  What does the PWR LED indicate?  Answer:  The green PWR LED shows the operating state of the Power Supply. PWR is ON when the Power Supply has a correct source of power and is operating properly. It is OFF when a Power Supply fault occurs or power is not applied.
  • Question:  What does the OK LED indicate?  Answer:  The green OK LED is steady ON if the PLC is operating properly. It is OFF if a problem is detected by the PLC. 
  • Question:  What does the RUN LED indicate?  Answer:  The green RUN LED is ON when the PLC is in Run mode. 
  • Question:  What is the input power (maximum with full load)?  Answer:  50 Watts maximum at full load
  • Question:  What is the output power?  Answer: 
    • 5 VDC: 30 Watts maximum
    • 24 VDC Relay: 15 Watts maximum
    • 24 VDC Isolated: 20 Watts maximum
      • Note: 30 Watts maximum total (all 3 outputs)
  • Question:  What is the protective limit for overcurrent?  Answer: 
    • 5 VDC output: 7 Amperes maximum
      • The 5 VDC output is electronically limited to 7 Amps. If an overload (including short circuits) occurs, it is sensed internally and the Power Supply shuts down. The Power Supply will continually try to restart until the overload condition is removed. An internal fuse in the input line is provided as backup. The Power Supply usually shuts down before the fuse blows. The fuse also protects against internal supply faults.
  • Question:  What should I do if my IC694PWR331 is not operating properly?  Answer: 
    • Your IC694PWR331 may need repair.

For more information on the IC694PWR331 24 VDC High Capacity, 30 Watt Power Supply of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.

Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.

Free Overnight delivery on orders over $500!

What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.

Free Overnight delivery on orders over $500!

What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!

What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.

Free Overnight delivery on orders over $500!

Download Lastest Documentation

Please visit this manufacturer's website to download the lastest manuals and datasheets.

Lowest Price Guarantee

We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping

FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.