1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC695ACC302

RX3i ACC302 Accessory

Rated 5/5 Based on 3 ratings.

Rate your purchase of the IC695ACC302
Loading...

SKU 2177327  UPC 0605431292873

disclaimer

New

$316

7 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

New Surplus

$279

1 In Stock

✓  3 Year PDF Supply Warranty

*What is New Surplus?

Other Available Revisions for the IC695ACC302 IC695ACC302-AAIC695ACC302-ABIC695ACC302-LT

Common misspellings:
  • 1C695ACC302
  • IC695ACC3o2
  • IC695ACC302

Technical Specifications for IC695ACC302

ManufacturerGE Fanuc
SeriesRX3i PACSystems
Part NumberIC695ACC302
DescriptionSmart battery module
Capacity15 Ah
Dimensions5.7 x 2.55 x 1.57 inches
CaseFlame-retardant ABS plastic
Output Voltage3 Volts
Battery Type3-cell lithium ion battery
Temperature0 to 60 degrees Celsius

Product Description


The IC695ACC302 is an Auxiliary Smart Battery module from the GE Fanuc RX3i Series.  See specifications for this unit on IC695ACC302's website page.

 

 

The IC695ACC302 module is a RX3i PACSystems GE Fanuc-manufactured auxiliary smart battery module. It provides extended backup for the volatile memory in a machine. It is reliable and it has a “low battery” detection feature. It is compatible with different RX3i PACSystems devices. The battery is a 3-cell lithium ion battery and comes with an output voltage rating of 3 Volts DC. It also has a capacity of 15 Amps per hour. The IC695ACC302 is part of the GE intelligent platform and it is mostly used in the industrial sector. The surrounding air temperature should be between 0 and 60 degrees Celsius for optimal operation. The battery is CE certified and it comes with different industrial standards. The battery should not be exposed to high heat and sources of electromagnetic radiation. 

 

During the installation of the IC695ACC302 battery, the CPU should be powered on with the mains. The battery will start draining if it is connected when the power is turned off. The 4-pin male JAE connector should be connected to the female 4-pin JAE connector on the battery module first. The IC695ACC302 battery comes with a battery monitoring circuit that enables the operators to detect a low battery before the battery is completely drained. The battery cable is placed into the notch in the bottom of the battery compartment of the RX3i PACSystems. The battery is lightweight and it weighs 224 grams. It has dimensions of 5.7 inches in length, 2.55 inches in width, and 1.57 inches in height. The outer case material is black and made of flame-retardant ABS plastic material.

Technical Information

Specifications

 

Parameter

Specification

Battery capacity

15.0 Amp-hours

Lithium content

5.1 grams (3 cells @ 1.7  grams/cell)

Physical dimensions

5.713” long x 2.559” wide x 1.571” high (145.1 x 65.0 x 39.9 mm)

Weight

224 grams

Case material

Black, flame-retardant ABS plastic

Connection

2’ (60cm) twisted red/black 22 AWG (0.326mm2) cable with female two-pin connector compatible with the battery connector on PAC Systems CPUs.

Operating temperature range

0 to +60ºC

Nominal shelf life

7 years @ 20ºC without the enabling adapter cable attached

Troubleshooting

Troubleshooting IC695ACC302

Troubleshooting information is available on IC695ACC302's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC695ACC302

PDF Supply can repair your IC695ACC302 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

%SA0011(System Variable: #LOW_BAT) Is Not Reliable For A Legacy(Non-Smart) Battery

Description

%SA0011 indicate the status of the battery, if a smart battery fail during CPU operation, %SA0011 will be logged, if a legacy (non-smart) battery fail during CPU operation, %SA0011 is not reliable

Resolution

Refer to GFK-2741D page 5 for information about PACSystems Smart batteries. Page 5 documents which CPU's support low battery detection.

PACSystems Battery and Energy Pack Manual

Notes:

1-Typical smart battery (only these batteries can be used to support low battery detection):

IC695ACC302, IC698ACC701C or later revisions

2-Typical legacy(non-smart) battery: IC693ACC302, IC698ACC701A, IC698ACC701B

 

Customer Questions and Answers


  • Question:  What is an IC695ACC302?  Answer:  The IC695ACC302 is an Auxiliary Smart Battery module from the GE Fanuc RX3i Series. 
  • Question:  What is special about IC695ACC302?  Answer:  This module is an enhanced version of IC693ACC302.
  • Question:  What does IC695ACC302 provide?  Answer:  In addition to providing an extended RAM memory backup time compared to that of the standard memory backup batteries (IC698ACC701) for PACSystems CPUs, the smart battery module has a battery monitoring circuit that enables the user to detect the Low Battery state in advance before it is completely drained. 
  • Question:  What does IC695ACC302 replace?  Answer:  This module replaces the standard CPU RAM backup battery in your control system for the PACSystems CPUs.
  • Question:  What should come in each IC695ACC302 package?  Answer: 
    • IC695ACC302 Auxiliary Smart Battery module having cable with 4-pin female JAE connector
    • Enabling adapter cable with 4-pin male to 2-pin female connector
  • Question:  Who should perform the testing of IC695ACC302?  Answer:  Only qualified personnel, who are trained in electrical safety practices and procedures should perform the testing of this module. This module is not user-serviceable. The IC695ACC302 contains a built-in 1-Amp fuse that will open if the unit is subjected to short-circuit or severe overload conditions. This fuse is sealed inside the battery pack and is not replaceable.
  • Question:  What should I do if my IC695ACC302 is not working properly?  Answer:  Your IC695ACC302 may need repair.

For more information on the IC695ACC302 Auxiliary Smart Battery Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Release History

Catalog Numbers

Version

Date

Comments

 

IC695ACC302-AB

 

1.1

 

August 2012

Resolves issue with indication of correct low battery period when used with higher versions of RX7i CPUs

IC695ACC302-AA

1.0

March 2011

Initial release

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.