PDF Electric and Supply

1-800-360-6802
1-919-535-3180
sales@pdfsupply.com

IC695ALG808

Buy NowIC695ALG808
IC695ALG808
IC695ALG808 Wiring

Rated 4.3/5 based on 9 ratings.
  • IC695ALG808
  • IC695ALG808 Wiring

Product Description


The IC695ALG808 is an Isolated, Voltage/Current, Analog Output module from the GE Fanuc RX3i Series. THis module provides 8 configurable voltage or current output channels.  See specifications for this unit on IC695ALG808's website page.

Technical Specifications


No. of channels: 8
Voltage Range: 0 to +10 V, -10 to +10 V
Current Range: 0-20 mA, 4-20 mA
Update Rate: 8 msec
Output Load: 1350 Ohms max
Power Consumption:   450 mA @ +3.3VDC      

 

 

GE Intelligent Platforms / GE Fanuc GE RX3i PacSystem

SKU 2173248  UPC 013059248026

Part Number: IC695ALG808 / ic695alg808
Mfr/Brand Name: GE Automation
Mfr Number: IC695ALG808 / ic695alg808
Type: Isolated Analog Output Module, 8 Channel, Voltage/Current

Troubleshooting and Product Information for IC695ALG808

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC695ALG808
Price: $2,534
10 In Stock
1 Year PDF Supply Warranty

*Need a Specific Revision?

New Surplus IC695ALG808
Price: $2,036
2 In Stock
3 Year PDF Supply Warranty

*What is New Surplus?

Save
 20%
Reman IC695ALG808
Price: $1,242
1
In Stock

2 Year PDF Supply Warranty

*What is Remanufactured?

Save
 51%
Repair Your IC695ALG808
Price: $967
1 Year PDF Supply Warranty
Call For Assistance
1-800-360-6802

Other IC695ALG808

Available Revisions:

Confirm Your Revision Number

1C695ALG808 , GEFIC695ALG808 , CIMIC695ALG808

Specifications

Output Ranges

Current: 0 to 20mA, 4 to 20mA Voltage: ± 10V, 0 to 10V

Backplane Power Requirements

360mA maximum at 3.3V 17mA maximum at 5.0V

Power Dissipation wctrial Module

7.25 Watts maximum (Vuser=24V)

Thermal Derating

None required

External +Power Supply

Voltage Range: 19.2V to 30V (24V nominal) Current:  160mA maximum

Class 2 or Limited Voltage/Current circuit required.

Resolution

±10V: 15 bits

0 to 10V: 14 bits

0 to 20mA: 15 bits

4 to 20mA: 15 bits

Output Data Format

Configurable as floating point IEEE 32 bit or 16-bit integer in a 32-bit field

Analog Update Rate

(Determined by I/O scan time, application dependent)

8 milliseconds (approximate, all eight channels)

Output Overvoltage Protection

Current wctrial only:  -30V for 60 seconds, +30V for one hour

Calibrated Accuracy

Accurate to within 0.15% of full scale at 25°C Accurate to within 0. 25% of full scale at 60°C

In the presence of severe RF interference (IC 801-3, 10V/M), accuracy may be degraded to ±1% FS.

Output Load Reactance

Current: 10µH maximum, Voltage: 1µF maximum

Maximmum Output Load

Current: 1350 Ohms maximum Voltage: 2 Kohms minimum

Output Gain Drift

Voltage output: 20ppm per degree C typical Current output: 35ppm per degree C typical

Output Settling Time

Voltage or current output: 2ms, 0 to 95%

Isolation, Field to Backplane

2550VDC for one second

Isolation, Channel to Channel

250 VAC continuous WCTRIAL for one minute

Troubleshooting IC695ALG808

Troubleshooting information is available on IC695ALG808's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC695ALG808

PDF Supply can repair your IC695ALG808 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers


  • Question:  What is an IC695ALG808?  Answer:  The IC695ALG808 is an Isolated, Voltage/Current, Analog Output module from the GE Fanuc RX3i Series. 
  • Question:  What does IC695ALG808 provide?  Answer:  This module provides 8 configurable voltage or current output channels. 
  • Question:  At what ranges can the analog channels be configured?  Answer: 
    • Current: 0 to 20mA, 4 to 20mA
    • Voltage: +/- 10 V, 0 to 10 V
  • Question:  Where must IC695ALG808 be located?  Answer:  This module must be located in an RX3i Universal Backplane. 
  • Question:  What kind of CPU firmware is required for use with IC695ALG808?  Answer:  This module requires an RX3i CPU with firmware version 5.0 or later. 
  • Question:  What is required for configuration?  Answer:  Machine Edition Version 5.7 SP3 Logic Developer-PLC or later must be used for configuration. 
  • Question:  What are some of the features of IC695ALG808?
    • Completely software-configurable, no module jumpers to set
    • Individually enable or disable channels
    • Clamping and alarm limits
    • Latching of alarms
    • Configurable output bias
    • Rapid channel acquisition times based on filter frequency
    • On-board error-checking
    • Configurable scaling and offsets per channel
    • High alarm, low alarm, high-high alarm, low-low alarm detection and reporting selectable per channel
    • Module fault reporting
    • Configurable Hold Last State or Output Defaults
  • Question:  What should I do if my IC695ALG808 is not working properly?  Answer:  Your IC695ALG808 may need repair

For more information on the IC695ALG808 Isolated, Voltage/Current, Analog Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Release History

Version

Firmware Revision

Description

 

IC695ALG808-GB

 

2.00

This is a new HW/FW release that addresses component obsolescence and is certified EU RoHS compliant.

 

IC695ALG808-FA

 

1.00

This HW-only change address a component tolerance stack-up issue that could result in component overstress on some modules when the terminal block is installed or removed with field power applied.

IC695ALG808-EA

1.00

Hardware revision for improved manufacturability. No change in functions, performance or compatibility.

IC695ALG808-DA

1.00

Label change only. No change in functionality, performance or compatibility.

 

IC695ALG808-CA

 

1.00

Modified the terminal block detector switch to increase the size of the switch lever. The increased size of the switch lever allows additional tolerance to assure contact with the terminal block actuator.

IC695ALG808-BA

1.00

Initial Release

Added UL Mark to the module

IC695ALG808-AA

1.00

Initial Release

 

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.


Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.


Free Overnight delivery on orders over $500!


What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.


Free Overnight delivery on orders over $500!


What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.


Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!


What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.


Free Overnight delivery on orders over $500!


Download Lastest Documentation


Please visit this manufacturer's website to download the lastest manuals and datasheets.


Lowest Price Guarantee


We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping



FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.