GE / IP FANUC Series 90/30 In Stock
SKU 2176144 UPC 040729483425
The IC695CPE310 is a CPU in the GE Fanuc PACSystem RX3i Series. The CPU can perform real-time control of machines, processes, and material handling systems. It communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane.
IC695CPE310 has a 1.1 GHz Atom processor and 10 MB of memory. Its embedded Ethernet interface accommodates two connections rated for 10Mb/sec and 100Mb/sec. It also has RS-485 and RS-232 serial ports. The module supports up to 512 program blocks, each of which can be as large as 128 KB. IC695CPE310 comprehends the Modbus RTU Slave, SNP, and Serial I/O protocols, while using the SNP protocol to communicate with human-machine interface (HMI) devices.
You can program the IC695CPE310 in Ladder Diagram, Structured Text, C, or Function Block Diagram programming languages. Labeled LED indicators on the unit housing can be green, red, off, or blinking when the unit is powered up. This makes troubleshooting efficient, and lets you verify system status at a glance.
IC695CPE310 can be installed in any pair of slots in the main RX3i controller rack except for the slots with the two highest numbers on them.
The processor in IC695CPE310 is approximately three times faster than the 300 MHz Celeron processor in the otherwise-similar model C695CPU310 . You can upgrade from CPU310 to CPE310 without changing legacy PME software. Please note that if you do decide to upgrade to CPE310 from CPU310, then the RS-232 port on CPE310 does not provide 5V power on pin 5.
|Processing Speed:||1.1 GHz|
|CPU Memory:||10 Mbytes|
|Power Requirements:||3.3 VDC, 5 VDC or 24 VDC|
|Serial Protocols:||Modbus RTU Slave, SNP Slave, Serial I/O|
|Embedded Comms:||RS-232, RS-485|