GE / IP FANUC Series 90/30 In Stock

Call Now

1-800-360-6802

Mon-Fri 8AM-5PM EST

1-919-535-3180

IC695CPE400

Rated 5/5 Based on 2 ratings.

Rate your purchase of the IC695CPE400

GE Rx3i Optimizing Controller Industrial Internet Control System | Image

GE Rx3i Optimizing Controller Industrial Internet Control System | Image GE Rx3i Optimizing Controller Industrial Internet Control System CPE400 | Image

SKU 2172469  UPC 0799705808171

New

$4197

7 In Stock

2 Year warranty

*Need a Specific Revision?

New Surplus

$3650

Save $547

1 In Stock

3 Year warranty

*What is New Surplus?

Order Today - Ships Today!

*US continental orders placed Monday-Friday before 4:30pm EST!

Other Available Revisions for the IC695CPE400 -AAAA-ABAB-ABAC-ABAE-ABAFCALT

Product Description


The IC695CPE400 is a compact Outcome Optimizing Controller from the GE Fanuc PACSystems RX3i Series. IC695CPE400 is a rackless and standalone part of what GE calls its Industrial Internet Control System. The controller supports PROFINET, the standard protocol for industrial networking. 

 

IC695CPE400 provides communication and analytics by leveraging a platform called Field Agent as a hypervisor. Field Agent enables the controller to interact with applications that can be either edge-based or cloud-based. In other words, the controller works equally well with applications that perform computations at the sensor level or "edge" of the network, and applications that parse data on remote servers. Firmware in IC695CPE400 uses an Ethernet port to automatically upgrade itself on power-up as needed. The controller has 64 MB of RAM and 64 MB of non-volatile flash memory. IC695CPE400 can use an optional energy pack (IC695ACC403) as a memory backup mechanism. With that energy pack, when unexpected fluctuations or outages cause the system to lose power, the controller preserves your data by writing it from short-term memory to long-term memory, where it can be recovered when power is restored.

 

You can program IC695CPE400 in Ladder Diagram, Structured Text, Function Block Diagram, or C syntax. The controller comes equipped with four independent Ethernet 10/100/1000 LANs. LAN1 uses a dedicated RJ45 connector on the front panel of the IC695CPE400 chassis. LAN2 and LAN3 attach through a pair of internally-switched RJ45 connectors. LAN4 plugs into the underside of the unit, and is used to connect the Field Agent platform.

Technical Specifications


Processing Speed: 1.2 GHz
CPU Memory: 64 Mbytes
Floating Point: Yes
Ethernet Interfaces:   2 (RJ-45)
Serial Protocols: SRTP, Modbus TCP, EGD, PROFINET, MRP 
Input Power: 20 Watts

 

Technical Information

Specifications:
  • A built-in RX3i PLC
    • User may program in Ladder Diagram, Structured Text, Function Block Diagram, or C.
    • Contains 64Mbytes of configurable data and program memory.
    • Supports auto-located Symbolic Variables that can use any amount of user memory.
    • Reference table sizes include 32k bits for discrete %I and %Q and up to 32k words each for analog %AI and %AQ. Bulk memory (%W) also supported for data exchanges.
    • Supports up to  512  program blocks. Maximum  block  size is 128KB.
  • Field  Agent  is a  platform for securely connecting  to Predix™, GE’s platform for the Industrial Internet. With the Field Agent, you can get connected  to  an  end-to-end  Asset  Performance  Management  solution such as Equipment Insight, Brilliant Manufacturing, or Machine and Equipment  Health.  The  Field  Agent  also  provides  a  platform  for developing your own Edge to Cloud Industrial Internet solutions. As an appliance, you can collect and transmit data to Predix Time Series or run pre-existing Edge Apps. As a development platform, you can develop your own Edge Apps or Analytics and deploy them via Predix Edge Manager.
  • Supports four independent 10/100/1000 Ethernet LANs. Three are located on the front panel, as shown in Figure 1. LAN1 attaches via the upper, dedicated RJ 45 connector. LAN2 and LAN3 each attach via a pair of internally-switched RJ 45 connectors. The fourth LAN, labeled EFA (Embedded Field Agent), is located on the underside (Figure 2), and is specifically used for Field Agent connectivity.
  • The embedded communications interface has dedicated processing

capability, which permits the CPU to independently support LAN1, LAN2 and LAN3  (LAN3 coming in 2017) with:

  • up to  48 simultaneous SRTP  Server connections;
  • up to  16 simultaneous Modbus/TCP Server connections;
  • 32 Clients are permitted; each may be SRTP or Modbus/TCP.
  • OPC UA Server with support for up to 5 concurrent sessions with  up to 10  concurrent variable  subscriptions and up to  12,500 variables;
  • up to 255 simultaneous Class 1 Ethernet Global Data (EGD) exchanges.
  • The embedded PLC may use one or both of the Ethernet LAN2 ports to support the embedded Simplex PROFINET    I/O Controller. PROFINET supports up to 32 I/O devices with update rates of 1 512ms. I/O device update rates of 8ms and faster are possible with 16 or fewer devices. Update rates of 16ms and higher result whenever more than   16  devices  are configured.
  • Embedded SNTP Client allows synchronization of the high-resolution Time of Day Clock to an SNTP network time server.
  • Media Redundancy Protocol (MRP) allows the CPE400 to participate in a PROFINET I/O network with MRP ring technology. This eliminates the I/O network as a single point of failure. The CPE400 may be used as either a Media Redundancy  Manager or  Media  Redundancy Client.
  • The CPE400 is secure by design, incorporating technologies such as Trusted Platform Modules, secure boot, and encrypted  firmware updates.
  • Achilles  Level  2 Communications Certification1
  • Optional Energy Pack, IC695ACC403, allows CPE400 to instantly save user memory to non-volatile storage in the event of loss of power.
  • OPC UA Sweep Mode & Sweep Time: The CPE400’s sweep mode and sweep time are available through the OPC UA server. The Sweep Mode variable reports  the controller’s current mode: Stop Disabled, Run Enabled, Stop Enabled,

 

Troubleshooting

Troubleshooting IC695CPE400

Troubleshooting information is available on IC695CPE400's website page; it also includes a datasheet, a user manual, and a wiring diagram.


Repair your IC695CPE400

PDF Supply can repair your IC695CPE400 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers


  • Question:  What is an IC695CPE400?  Answer:  The IC695CPE400 is an Outcome Optimizing Controller from the GE Fanuc RX3i Series. 
  • Question:  With what is IC695CPE400 equipped?  Answer:  It is equipped with a 1.2 GHz quad-core microprocessor, 64 Mbytes of built-in program memory and 4 independent high-speed Ethernet interfaces. 
  • Question:  What does IC695CPE400 do?  Answer:  This controller uses real-time hypervisor technology to run real-time deterministic control applications.
  • Question:  Where does IC695CPE400 reside and what does it support?  Answer:  It is a Stand Alone Controller (Rackless) and works with Field Agent technology.
  • Question:  How much user memory does IC695CPE400 contain?  Answer:  64 Mbytes
  • Question:  What should I do if my IC695CPE400 is not working properly?  Answer:  Your IC695CPE400 may need repair.

For more information on the IC695CPE400 Outcome Optimizing Controller of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Current Release Information

 

 

Catalog Number

 

 

Date

Firmware Version (Build Number)

Field Upgradeable Elements

PAC

Systems

FPGA

CPLD

ACC403

EP Base

Field Agent

IC695CPE400

-ABAF

October 2017

9.30 (E8JL)

02.03.00

2.2.0

3.03

2017_07_10_160104

  

 

 

Catalog Number

 

 

Date

Firmware Version (Build Number)

Field Upgradeable Elements

PAC

Systems

FPGA2

CPLD

ACC403

EP Base

Field Agent

IC695CPE400

-ABAE

 

July 2017

9.20 (E7QB)

 

2.2.0

 

2.2.0

 

3.03

 

2017_07_10_160104

IC695CPE400

-ABAC

 

April 2017

9.20 (E7QB)

 

2.2.0

 

2.2.0

 

3.03

 

2017_01_19_182114

IC695CPE400

-ABAB

January 2017

9.00 (E79S)

 

2.2.0

 

2.2.0

 

3.03

 

2017_01_19_182114

IC695CPE400

-AAAA

December 2016

9.00 (E79S)

 

2.2.0

 

2.2.0

 

3.03

 

2016_12_14_220042

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Only the last two digits of the FPGA version are displayed on the Firmware Update Web Page. For example, if the FPGA version is 2.2.0, the web page displays 2.00.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE! World’s largest warehouse of Factory Sealed GE 90-30, Genius and Rx7i PLC.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

TOP