1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.9/5 Based on 7 ratings.

Rate your purchase of the IC695CPK330
Image of IC695CPK330

SKU 2171232  UPC 0799705806733




1 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

New Surplus


1 In Stock

✓  3 Year PDF Supply Warranty

*What is New Surplus?

Repair Service


5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Other Available Revisions for the IC695CPK330 IC695CPK330-AAAAIC695CPK330-Programming SoftwareIC695CPK330-LT

Common misspellings:
  • 1C695CPK330
  • IC695CPK33o
  • IC695CPK330

Technical Specifications for IC695CPK330

ManufacturerGE Fanuc
SeriesRX3i PACSystems
Part NumberIC695CPK330
Product TypeCPU
RJ-45 PortSupported
Outstation CommunicationHART SNP, SRTP, and DNP3 protocols
Etherent PortYes
Energy PackYes
USB PortYes

Product Description

The IC695CPK330 is a Central Processing Unit housed with an energy pack and an RJ-45 Ethernet port (10/100/1000 Mbaud). Working with firmware on the controller, the energy pack supports retention of volatile memory throughout any power outages or unexpected fluctuations. When you lose system power, the energy pack ensures that the controller has time to write the contents of volatile memory over to non-volatile memory. If you have configured your controller to power up from RAM, then when power comes back online, the contents of user memory are also restored.


IC695CPK330  is part of the GE Fanuc PACSystems RX3i Series. Like other controllers in the RX3i Series, IC695CPK330 runs Proficy Machine Edition software from General Electric. It has a 1 GHz Dual Core processor, and comes with 64 MB of user logic memory (RAM). IC695CPK330 has a minimal and efficient footprint, occupying only two slots on a universal backplane.   


The energy pack in IC695CPK330 can supply a maximum of 45 Watts. Firmware for the energy pack is automatically updated by the controller whenever necessary, based on a system check that the controller does during the module's power-up phase. The energy pack has a five-year life expectancy, provided you install it as recommended. You should avoid installing this module in direct sunlight, or where it risks exposure to rain, other liquids, or corrosive gasses. In addition, it is always good practice to install energy packs next to the controllers they support, placing such modules in areas to which access is restricted. The cable length between an energy pack and the controller it supports should not exceed one meter (approximately 3 feet).

Technical Specifications

Processing Speed: 1 GHz
CPU Memory: 64 Mbytes
Floating Point: Yes
Ethernet Interfaces: 2 (LAN 1 & LAN 2)
Serial Protocols: Modbus RTU Slave, SNP Slave, Serial I/O
Embedded Comms: RJ-45


The GE Fanuc IC695CPK330 module is a CPU module manufactured as part of the RX3i PACSystems series. It comes with an energy pack as well as an Ethernet port, and with support for universal backplanes only. This module features a battery-backed real-time clock and a CPU module memory with a 64-MB capacity. The dynamic data backup is provided in the energy pack for battery-less backup. The GE Fanuc IC695CPK330 CPU module has support for 32K analog I/O points and 32K discrete I/O points. It supports high-speed CompactFlash memory, and its dual-core processor speed is 1.6 Gigahertz. There is also a USB 2.0 port which is used for CPU application uploads and downloads to a smartphone or thumb drive. This module supports 10, 100, and 1000 Mbaud Ethernet speeds with the RJ-45 port. The 2-port 10, 100, and 1000 Mbaud switch is integral to this CPU module.

The IC695CPK330 CPU module supports a maximum 8 local racks. Some of its communication options are the HART SNP, SRTP, DNP3 outstation, IEC104, OPC-UA EGD, and IEC61850 protocols. The I/O protocols for this CPU module are the Modbus TCP, Genius, Modbus TRU, Devicenet, Profibus, Reflective Memory, and EGD protocols. The programming software used for this unit is the Machine Edition Logic Developer PLC 8.6 SIM8 software. This program can be used for the configuration and programming of the IC695CPK330 CPU module. This module also has support for various programming languages like the structured text, ladder logic, and function block diagram programming languages. It also has power requirement of 3.3 Amps at a voltage of 5 Volts DC.


Troubleshooting IC695CPK330

Troubleshooting information is available on IC695CPK330's website page; it also includes a datasheet user manual and a wiring diagram.


Repair your IC695CPK330

PDF Supply can repair your IC695CPK330 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC695CPK330?  Answer:  The IC695CPK330 is a Central Processing Unit with an Energy pack and an Ethernet Port from the GE Fanuc RX3i Series.
  • Question:  What type of module is IC695CPK330?  Answer:  It is a controller.
  • Question:  What kind of Backplane support is needed for IC695CPK330?  Answer:   Universal Backplane only (and it uses PCI Bus)
  • Question:  What is the User Logic Memory?  Answer:  64 Meg bytes
  • Question:  What is the processor speed for IC695CPK330?  Answer:  1.0 GHz Dual Core
  • Question:  Are there built-in Ethernet Ports?  Answer:  Yes, there is 1 RJ-45 port (10/100/1000 Mbaud) and one 2-port (RJ-45) switch (10/100/1000).
  • Question:  How many slots does IC695CPK330 occupy on the Backplane? Answer:  2
  • Question:  What should I do if my IC695CPK330 is not working properly?  Answer:  Your IC695CPK330 may need repair.

For more information on the IC695CPK330 Central Processing Unit (with Energy Pack and Ethernet Port) of the GE Fanuc RX3i Series, please see the Datasheet User Manual.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.