GE / IP FANUC Series 90/30 In Stock
GE Emerson RX3i PacSystem was introduced to replace the Series 90-30 PLC system. It uses the same I/O system as the GE Series 90-30 but offers more high speed I/O modules.
GE Emerson RX3i PacSystem was introduced to replace the Series 90-30 PLC system. It uses the same I/O system as the GE Series 90-30 but offers more high speed I/O modules.
About GE Fanuc RX3I PacSystem
GE Automation and Controls’ PACSyctems RX3i are Programmable Automation Controller (PAC) products that are designed to meet modern control requirements. This Programmable Controller products from GE are mainly composed of high-speed processors which are embedded with GE’s patented technology that enables faster data throughput.
The PACSyctems RX3i is a Highly scalable, Open architecture Controller platform that uses Two (2) Types of Backplane such as a High-speed Peripheral Component Interconnect (PCI) backplane that is typically used for new adavanced I/O modules, enabling faster data throughput and Serial Backplane used for serial based modules such as GE Fanuc Series 90/30 modules for simplified migration.
GE’s PACSyctems RX3i Central Processing Units (CPU) are capable of implementing simple to advanced control algorithms and are available in a number of selection with impressive specifications. Theses CPUs include CPE330 embedded with 1 GHz dual core CPU with 64 MB of user memory and embedded Ethernet, CPE305 with 1.1 GHz CPU with 5 MB of user memory with built-in Ethernet, CPE310 1.1 GHz CPU along a 10 MB user memory and embedded Ethernet communication interface, CPU310 that is installed with a 300 MHz CPU with 10 MB of user memory, CPU315 with 1 GHz CPU with 20 MB of user memory, CPU320 that installed with 1 GHz CPU with user memory amounting to 64 MB, CRU320 1 GHz CPU used for Redundant controller configuration with 64 MB of user memory, NIU001 which is a High-speed 300 MHz Ethernet Network Interface Unit, NIU001+ that boasts of 1.1 GHz Ethernet Network Interface Unit.
Aside from the PLC CPU, the GE’s PACSyctems RX3i are compatible with a wide selection of modules such as discrete, analog and specialty modules. These modules may be installed locally along the controller rack or remotely, for implementing distributed I/O architecture.
The PACSyctems RX3i modules support hot insertion and removal feature or Hot Swap feature in both PCI backplane and serial Backplane for new modules and even, migrated I/O modules.
Configuration and Programming of the PACSyctems RX3i is performed with the use of Proficy Machine Edition (PME) software application. This programming software is the common programming software for the entire PACSyctems RX3i. This programming software is Microsoft Windows operating systems compatible that are built with standard programming tools in a well-defined project view and user-friendly interface. It is also built with test and commission tools, online and offline edits, program comparison tool and supports simplified editing methods such as drag and drop feature. Ethernet enabled controllers are provided with built-in Webserver allowing remote viewing a=of system operation with the use of standard web browsers.
The PACSyctems RX3i also supports migration of legacy GE Fanuc controller platforms, including the Genius Bus feature by providing a serial bus backplane ideally used for Series 90-30 modules. This enables simplified migration, reduces engineering period and shortens process downtime due to replacement of the controller.
The PACSyctems RX3i supports implementation of redundant controller configuration, for demanding and critical application. It also added newer type of highly-specific specialty modules such as the Clamp Position module and Injection Position Module.
PROS:
CONS:
IC694ALG220 | Input module, analog 4 point voltage. Rx3i PacSystems GE IC69 ALG220 IC69 IC694AL IC694ALG | Buy Now |
IC694ALG221 | Input module, analog 4 point current Rx3i PacSystems Module GE IC694 IC69 IC694AL IC694ALG | Buy Now |
IC694ALG222 | Input module, analog 16 point single ended/8 channel differential, voltage. IC IC694AL IC694ALG | Buy Now |
IC694ALG223 | Input module, analog 16 point single ended, current. 4 to 20 mA Module IC6 IC694AL IC694ALG | Buy Now |
IC694ALG390 | Analog Output module data store in CPU 16-bit 2s complement format IC69 IC694AL IC694ALG | Buy Now |
IC694ALG391 | Output module analog 2 points, current. Voltage 4 to 20 and 0 to 20 mA IC6 IC694AL IC694ALG | Buy Now |
IC694ALG392 | Output module analog 8 points, voltage/current. 0 to +10 voltas (unipolar) IC IC694AL IC694ALG | Buy Now |
IC694ALG442 | Analog combination module current/voltage 4 inputs 2 outputs. Rx3i Pac IC69 IC694AL IC694ALG | Buy Now |
IC695ALG106 | Isolated Analog module, 6 individual isolated channels Voltage/Current IC69 IC695AL IC695ALG | Buy Now |
IC695ALG112 | Isolated Analog module, 12 individual isolated channels Voltage/Current IC69 IC695AL IC695ALG | Buy Now |
IC695ALG306 | Rx3i Isolated Thermocouple Input Module (provides six isolated differential thermocouple) IC69 | Buy Now |
IC695ALG312 | GE IP Isolated Thermocouple Input module 12 INPUTS Rx3i PACSystems GE PLC IC695ALG IC695 | Buy Now |
IC695ALG412 | GE IP High Speed 12 channel isolated thermocouple module Rx3i PACSystems GE PLC IC695ALG | Buy Now |
IC695ALG508 | GE IP RX3i Isolated RTD Input module Rx3i PACSystems GE PLC IC695A IC695ALG5 IC695ALG50 | Buy Now |
IC695ALG600 | UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE IC6 IC695AL IC695ALG | Buy Now |
IC695ALG608 | Analog Input module, 8 channels single ended, 4 channels differential IC69 IC695AL IC695ALG | Buy Now |
IC695ALG616 | Analog Input module, 16 channels single ended, 8 channels differential IC695 IC695AL IC695ALG | Buy Now |
IC695ALG626 | Analog Input HART module, 16 channels single ended, 8 channels differential IC695 IC695ALG | Buy Now |
IC695ALG628 | Analog Input HART module, 8 channels single ended, 4 channels differential GE IC695 IC695ALG | Buy Now |
IC695ALG704 | Analog Output Module, 4 channels,that is configurable Rx3i PACSystems GE PLC IC69 IC695ALG | Buy Now |
IC695ALG708 | Analog Output Module, 8 channels,that is configurable Rx3i PACSystems GE PLC IC695 IC695ALG | Buy Now |
IC695ALG728 | Analog Output HART Module, 8 channels,that is configurable Rx3i GE PLC IC6 IC695AL IC695ALG | Buy Now |
IC695ALG808 | Isolated Analog Output Module, 8 channels, that is configurable GE PLC IC69 IC695AL IC695ALG | Buy Now |
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.