GE / IP FANUC Series 90/30 In Stock
Call Now
1-800-360-6802
Mon-Fri 8AM-5PM EST
1-919-535-3180
IC698CPE040
SKU 2173148 UPC 0613194251327
MSRP $35070
Product Description
The IC698CPE040 is a 1.8 MHz Central Processing Unit manufactured by GE Fanuc for the RX7i series. The IC698CPE040 features a Pentium-M microprocessor loaded with 64 MB of user memory and 64 MB of user flash. Just like any other RX7i CPU, IC698CPE040 is configured to perform real time control of devices, processes, and material handling structures. A rack-mounted backplane facilitates communication between IC698CPE040, I/O, and smart option modules via the VME64 Standard format. Embedded Ethernet ports facilitate communication between IC698CPE040, the programmer, and different HMI devices.
When powered, the IC698CPE040 undergoes a general self-diagnostic check. LED lights turn on and off in sequence during the initialization process. As soon as initialization has ended, the OK LED light will blink and then turn on. RAM memory is protected by a lithium battery pack IC698ACC701. To avoid loss of memory, a routine maintenance procedure should include scheduled replacement of the lithium battery pack. Apart from maintaining the program and data memory, the lithium battery also operates the calendar clock in case of power failure.
The IC698CPE040 CPU offers a number of important features, which include auto-located symbolic variables that use any amount of user memory, VME module support, a test edit mode that allows users to easily test modifications even when a program is running, bit-in-word referencing, and three distinct serial ports. CPU and module firmware can be upgraded through Win loader on the CPU’s RS-232 or RS-485 serial ports.
Technical Specifications
| Processing Speed: | 1.8 GHz |
| CPU Memory: | 64 Mbytes |
| Floating Point: | Yes |
| Serial Ports: | 3 |
| Serial Protocols: | Modbus RTU Slave, SNP, Serial I/O |
| Embedded Comms: | RS-232, RS-486. Ethernet interface |
Technical Information
|
Battery: Memory retention |
For battery selection, installation and estimated life, refer to the PACSystems Controller Battery and Energy Pack Manual, GFK-2741. |
|
Program storage |
Up to 64 Mbytes of battery-backed RAM 64 Mbytes of non-volatile flash user memory |
|
Power requirements: CPE030
CPE040 |
+5 VDC: 3.2 Amps nominal +12 VDC: 0.003 Amps nominal -12 VDC: 0.003 Amps nominal +5 VDC: 6.8 Amps nominal +12 VDC: 0.003 Amps nominal -12 VDC: 0.003 Amps nominal |
|
Operating temperature: CPE030 CPE040 |
0 to 50°C (32°F to 122°F) 0 to 60°C (32°F to 140°F) with fan tray 0 to 60°C (32°F to 140°F), fan tray required |
|
Boolean execution speed, typical: CPE030 CPE040 |
0.069ms per 1000 Boolean contacts/coils 0.02391ms per 1000 Boolean contacts/coils |
|
Time of Day Clock accuracy |
Maximum drift of ±2 seconds per day |
|
Elapsed Time Clock (internal timing) accuracy |
±0.01% maximum |
|
Embedded communications |
RS-232, RS-485, Ethernet interface |
|
Serial Protocols supported |
Modbus RTU Slave, SNP, Serial I/O |
|
Ethernet Ports |
Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet interface |
|
VME Compatibility |
System designed to support the VME64 standard ANSI/VITA 1 |
|
Program blocks |
Up to 512 program blocks. Maximum size for a block is 128KB. |
|
Memory (For a detailed listing of memory areas, refer to the CPU Reference Manual, GFK-2222.) |
%I and %Q: 32Kbits for discrete %AI and %AQ: configurable up to 32Kwords %W: configurable up to the maximum available user RAM Managed memory (Symbolic and I/O variables combined): configurable up to 10 Mbytes |
|
Ethernet Interface Specifications |
|
|
Web-based data monitoring |
Up to 16 web server and FTP connections (combined) |
|
Ethernet data rate |
10Mb/sec and 100Mb/sec |
|
Physical interface |
10BaseT RJ45 |
|
WinLoader support |
Yes |
|
Number of EGD configuration-based pages |
255 |
|
Time synchronization |
SNTP |
|
Selective consumption of EGD |
Yes |
|
Load EGD configuration from RX7i to programmer |
Yes |
|
Remote Station Manager over UDP |
Yes |
|
Local Station Manager (RS-232) |
Dedicated RS-232 port |
|
Configurable Advanced User Parameters |
Yes |
Troubleshooting
Troubleshooting IC698CPE040
Troubleshooting information is available on IC698CPE040's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC698CPE040
PDF Supply can repair your IC698CPE040 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC698CPE040? Answer: The IC698CPE040 is a 1.8 GHz Central Processing Unit from the GE Fanuc RX7i Series with an Intel Pentium-M microprocessor.
- Question: What does IC698CPE040 do? Answer: This CPU can be used to perform real time control of machines, processes, and material handling systems.
- Question: How does IC698CPE040 communicate with the programmer? Answer: The CPU communicates via the internal Ethernet port or a serial port.
- Question: How does IC698CPE040 communicate with I/O and Intelligent Option modules? Answer: The CPU communicates over a rack-mounted backplane using the VME64 Standard format.
- Question: What happens when I power up IC698CPE040? Answer: It will do an overall self-diagnostic check. As the CPU powers up, the LEDs turn on and off in a specific sequence. Refer to the Installation Manual.
- Question: What should the end result be of the self-diagnostic check? Answer: During initialization, the EOK LED light blinks and then turns on when the initialization is complete.
- Question: How can I avoid RAM memory loss? Answer: Routine maintenance procedures should include scheduled replacement of the CPU's IC698ACC701 lithium battery pack. The battery maintains program and data memory and operates the calendar clock when the power is removed.
- Question: If I don't have any light on or the CPU is not functioning correctly - What does that mean? Answer: It means there is something wrong with your processor and it will need repair or maybe even replacement.
For more information on the IC698CPE040 Central Processing Unit of the GE Fanuc RX7i Series, please see the Datasheet User-Manual.
| Catalog Numbers | Date | CPU Firmware Version | Ethernet Firmware Version |
| IC698CPE030-JP/IC698CPE040-JP | May. 2013 | 6.75 | 6.2 |
| IC698CPE030-HN/IC698CPE040-HN | May. 2012 | 6.75 | 6.13 |
| IC698CPE030-GN/IC698CPE040-GN | Apr. 2012 | 6.75 | 6.13 |
| IC698CPE030-GM/IC698CPE040-GM | Feb. 2012 | 6.75 | 6.12 |
| IC698CPE030-GL/IC698CPE040-GL | Nov. 2011 | 6.75 | 6.1 |
| IC698CPE030-GK/IC698CPE040-GK | Jul. 2011 | 6.71 | 6.1 |
| IC698CPE030-GJ/IC698CPE040-GJ | Nov. 2010 | 6.01 | 6 |
| IC698CPE030-FJ/IC698CPE040-FJ | Mar. 2010 | 6.01 | 6 |
| IC698CPE030-FH/IC698CPE040-FH | Sep. 2009 | 6 | 6 |
| IC698CPE030-FG/IC698CPE040-FG | Dec. 2008 | 5.5 | 5.51 |
| IC698CPE030-FF/IC698CPE040-FF | Oct. 2008 | 5.5 | 5.5 |
| IC698CPE030-EF/IC698CPE040-EF | May. 2008 | 5.5 | 5.5 |
| IC698CPE030-EE/IC698CPE040-EE | Dec. 2007 | 5 | 5.01 |
| IC698CPE030-ED/IC698CPE040-ED | Oct. 2007 | 5 | 5 |
| IC698CPE030-DD/IC698CPE040-DD | Aug. 2007 | 5 | 5 |
| IC698CPE030-DC/IC698CPE040-DC | Jul. 2007 | 4.02 | 4 |
| IC698CPE030-CC/C698CPE040-CC | Dec. 2006 | 4.02 | 4 |
| IC698CPE030-CB/IC698CPE040-CB | Sep. 2006 | 4 | 4 |
| IC698CPE030-BA/IC698CPE040-BA | Sep. 2006 | 3.6 | 3.6 |
| IC698CPE030-AA | Apr. 2006 | 3.6 | 3.6 |
| IC698CPE040-AA | Dec. 2005 | 3.6 | 3.6 |
Common related search terms: Battery, Configuration, Datasheet, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
You May Also Need
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.