GE / IP FANUC Series 90/30 In Stock
SKU 2171109 UPC 0922839922165
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC698PSA100 is a versatile Power Supply Module manufactured by GE Fanuc for the RX7i series. This PACSystems module delivers +5 VDC, +12 VDC, and -12 VDC power as well as logic level sequencing signals to modules on the backplane. The module plugs straight into slot 0 in the main rack. The IC698PSA100 module’s power supply output can lose up to one AC input line cycle without actually losing output power. Overcurrent, overtemperature, and overvoltage fault conditions are also protected. The module allows 100 watts total output power at ambient temperatures of 0 to 60ºC with no forced air cooling.
Output voltages are as follows: +5 VDC output up to 20 amps, +12 VDC output up to 2 amps, and -12 VDC output up to 1 amp. Additional features of the IC698PSA100 module include operation from 85 to 264 VAC or 100 to 150 VDC and power factor correction for AC operation. This module is designed for simple slide-in rack mount construction. The two-position On/Off switch is situated on the front faceplate. It is a logic level switch that enables or disables the output channels. This switch will not interrupt the AC line input. Please note: Lethal voltages are present inside the module when input power is present. The IC698PSA100 comes equipped with LED indicators to alert the user to both field and output status. These will turn ON when power is applied within the acceptable range and when DC output channels are operating correctly.
|Nominal Rated Voltage:||120/240 VAC or 125 VDC|
|Input Voltage Range:||85 to 264 VAC or 100 to 150 VDC|
|Input Power:||125 W|
|Output Voltages:||+ 5 VDC, +12 VDC or -12VDC|
|Module Type:||Power Supply|
|Rack Location:||Slot 0 (Leftmost slot)|
Part Number: IC698PSA100 / ic698psa100
Mfr/Brand Name: GE Automation
Mfr Number: IC698PSA100 / ic694psa100
Type: 100 Watt Power Supply Module
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.